? for you ILF guys/ plunger button?

[Don Batten]

I saw a morrison mini 13 on classifieds. It looked to me that it had two holes for a plunger. one at the regular spot and one lower. Is this for shooting off the shelf but using a plunger button instead of a rug or leather side plate?

I think that would be cool. best of both worlds. arrow close to the hand but the ease of tunning with the spring plunger.

Also, Is there a rule to go by for limb wt/ lenghth. for example. a 13" riser with this limb makes a 56" bow at 45lbs . what will the same limbs be on a 17" riser etc. thanks in advance. Don

[vermonster13]

That is what the two holes are for. I shoot a few of mine off the shelf with the plunger. Bob has a chart on his page for the weight differences, his 13" only gains one or two pounds over the 17" with the same limbs.

[2 Barrels]

From what i understand Bob changes his limb angle a little from riser length to riser length.So his limbs come out at the same weight on all his riser.With other manufactures limbs his risers are plus 10#.Meaning a long ILF limb marked at 40# on a 25" riser.Will be 50# on Morrisons risers.And the plunger is a nice option.Thanks,Jim