3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Removing Nock  (Read 237 times)

Offline bigugly1

  • Trad Bowhunter
  • **
  • Posts: 220
Removing Nock
« on: January 11, 2011, 09:13:00 PM »
Yeah I'm new. How dies one go about taking a nock off the string? Say you have one on the string but want to just use a floss nock and you need to get brass mock off. Is it a simple case of prying it off?

Offline Grey Taylor

  • Trad Bowhunter
  • **
  • Posts: 1546
Re: Removing Nock
« Reply #1 on: January 11, 2011, 09:19:00 PM »
Easiest is to cut the string with scissors right above the nock and then right below it.
You will need a new string, though.

Ok, for real... nock pliers have a little deal that opens the nock up so you can move it or take it off. If you don't have those see what you can use to pry it open but be very careful to not damage the string.
If you have a local archery shop they should have the tool and maybe won't charge you to take the nock off.

Guy
Tie two birds together; though they have four wings, they can not fly.
The Blind Master

Offline luvnlongbow

  • Trad Bowhunter
  • **
  • Posts: 435
Re: Removing Nock
« Reply #2 on: January 11, 2011, 09:21:00 PM »
A nockset can be removed with an inexpensive set of Nockset Pliers. Other than that, just pry the brass nockset open and remove.

Joe

Offline BOWMARKS

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1984
Re: Removing Nock
« Reply #3 on: January 11, 2011, 09:21:00 PM »
Find someone with a set of nock pliers all archery shops have and one of your shooting buddies must.If you try to pry off with normal plyers you will most likely wreck your string!!
Kanati Long Bow 56"-45#@27"
Hoot's Long Bow 56"-45#@27"
Shrew Classic Hunter 56"-47#@28"


TGMM Family Of The Bow
United Bowhunters of Penna.
Compton Traditional Bowhunters
Professional Bowhunters Society

Offline bigugly1

  • Trad Bowhunter
  • **
  • Posts: 220
Re: Removing Nock
« Reply #4 on: January 11, 2011, 09:22:00 PM »
Now I know, guess another order to 3rivers is coming up.

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Re: Removing Nock
« Reply #5 on: January 11, 2011, 09:22:00 PM »
Just use a pair of needle nose pliers if you don't have nock pliers, be gentle and just try to grab the edge of the nock and pull gently. It's only brass and bends easily with a little force. If nothing else use a small screwdriver to pry one edge of the nock away from the string enough to get it off without damaging the serving.

Just be careful you don't damage the serving or you will be making a trip to the bow shop anyway.
~Varitas Vos Liberabit~ John 8:32

Offline ch1ch2

  • Trad Bowhunter
  • **
  • Posts: 61
Re: Removing Nock
« Reply #6 on: January 11, 2011, 10:00:00 PM »
flat tip screw driver (very small) and needle nose pliers work.

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: Removing Nock
« Reply #7 on: January 11, 2011, 11:52:00 PM »
Butter knife.

Offline Friends call me Pac

  • Trad Bowhunter
  • **
  • Posts: 1301
Re: Removing Nock
« Reply #8 on: January 12, 2011, 01:08:00 AM »
When I still used brass nocks and had to remove them I always unstrung the bow so there was no tension on the string.  Don't know if it really mattered but it eased my mind.

Next I took two pair of needle nose pliers and pulled the nock open.

I learned how to tie on an adjustable  screw type nock and that's all i use anymore.  There is a how to article about this nock that might be of interest.
USAF Retired '85-'05

An old hand me down recurve sparked the fire, Trad Gang fanned the flames.  There is no stopping now.  Burn baby burn!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©