Author Topic: New Years resolution #1 checked off the list! (Read 365 times)

Toecutter · « **on:** January 16, 2011, 01:50:00 PM »

Well, I've been meaning to make one of those thar arra spinner thingys for a while now, got it done finally last week. (Resolution#2 was to post these pics :D ) Anyways, I guess I could have used four nails or four marbles and it would have been just as effective, but I've never been one to let reason or good judgement deter me!!

Anyways, the cool thing about the rollers that I got form Lowes is they have the same thread as an arrow insert. (Imagine a forest fire of scheming at that realization!!) Anyhow, After a firm self-talking to (took longer to convince myself than one would hope), I was discouraged from using broadheads and settled on the relatively safe (and boring) field points. So in the interest of time, here it is... Probably didn't need a hand-rubbed finish either, but then again, it couldn't hurt either...

http://i381.photobucket.com/albums/oo260/nathan835/021.jpg

http://i381.photobucket.com/albums/oo260/nathan835/023.jpg

http://i381.photobucket.com/albums/oo260/nathan835/057.jpg

Got the wood from some old pallets that were getting thrown away. Not bad grain eh?

Toecutter · « **Reply #1 on:** January 16, 2011, 01:52:00 PM »

Uh oh, problems in picture posting land...HELP

macksdad · « **Reply #2 on:** January 16, 2011, 02:02:00 PM »

Arrow roller looks good!

rastaman · « **Reply #3 on:** January 16, 2011, 02:03:00 PM »

Here you go sir!

Coonbait · « **Reply #4 on:** January 16, 2011, 02:04:00 PM »

NICE!!
Glenn

Toecutter · « **Reply #5 on:** January 16, 2011, 02:09:00 PM »

You sir, are a gentleman and a magician of sorts!!

What did i do wrong?? Posted a bunch of pics here over the years, never did that before?? Thanks again, Nathan

rastaman · « **Reply #6 on:** January 16, 2011, 02:11:00 PM »

Nathan, use the bottom code on the pics on photobucket...the IMG code.
Glad i could help.

Toecutter · « **Reply #7 on:** January 16, 2011, 02:14:00 PM »

Thought thats what I did. You have to delete the [img} part front and back right?

rastaman · « **Reply #8 on:** January 16, 2011, 02:26:00 PM »

no sir...when you delete the img code it causes it to show up like it did with you.
Just copy and then paste the whole code, then use the preview button on here to be sure you did it right then...magic.

Toecutter · « **Reply #9 on:** January 16, 2011, 02:27:00 PM »

HAHA, thanks again!!

adkmountainken · « **Reply #10 on:** January 16, 2011, 02:33:00 PM »

photobucket switched things around a bit just a couple months ago, threw me off at first. nice set up bro!

ronp · « **Reply #11 on:** January 16, 2011, 03:47:00 PM »

Real nice work!

$bowhunter$ · « **Reply #12 on:** January 16, 2011, 03:50:00 PM »

looks good. i have a stupid question though. whats the need for an arrow roller?

steven

drewsbow · « **Reply #13 on:** January 16, 2011, 04:05:00 PM »

Nice work as allways Brother

bawana bowman · « **Reply #14 on:** January 16, 2011, 04:13:00 PM »

Nice looking spinner, I've got a few spare pieces of oak I've been wondering what to do with. Looks like I've found an answer. Guess I'll follow your lead and make a spinner.

Thanks for the Idea!

Covey · « **Reply #15 on:** January 16, 2011, 05:32:00 PM »

Great looking spinner! Where did you get the rollers? Might try my hand at making one. Jason

Toecutter · « **Reply #16 on:** January 16, 2011, 08:19:00 PM »

Thanks fellas.
Hey Ken, was just wondering about you yesterday. Glad to see you on here again. Hope all is well.

A spinner is a simple little tool to help you keep your inserts true to the arrow shaft during the glue in phase of the process. I like to let the glue set a little so that its a little firm and will hold your tweaking as you go. Your results may vary..

Truthfully I only made this thing to gain some sort of competetive edge over Drew in our next stumping session. Unfortunately I dont think its gonna help me much.

Covey, I got them at Lowes. $3.97 I think. Good luck

Toecutter · « **Reply #17 on:** January 16, 2011, 08:25:00 PM »

Also the longest headed, machine-trued, broadheads are the best for this(glue-ons might not be the best for this). You wanna extend that plane as long as you can in order to get a true representation of how the insert sits.

Dave Alaxanian · « **Reply #18 on:** January 16, 2011, 11:03:00 PM »

Sweet Job!


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: New Years resolution #1 checked off the list! (Read 365 times)

Users currently browsing this topic: