99 questions please advise

[Tav]

I want to start cutting my own arrows.  I have a 12" chop saw, will that work with the right kind of blade?  what kind of blade do I need?  I am off to harbor freight today to look at the little cutoff saw everybody talks about. what blade do I need for that little saw.  I am cutting carbon by  the way.

I shoot a Bear Grizzly from the early 70's.  Everytime I take the string off the next time i string it up the brace height is 1/8 to 1/4 more than when I took it off.  so I have been leaving it strung so my brace height is the same everytime i shoot.  I have well over 1000 shots on that string.  Should I be unstrining my bow?  is the increase in brace height the string (B50) or the bow?  thanks for the help.
Tav

[FerretWYO]

As for blade just a metal cut off blade will work best. I am not sure I would go with the chop saw. I use just a small dremel tool and a metal cut off blade. The harbor frieght saw does work well though.

You should have not trouble leaving your bow strung buddy.

[Tav]

Thanks man.  I am laughing....I was trying to give you a break from all my questions and you are the first to jump in.  you're a good guy.  thanks.

[**DONOTDELETE**]

Originally posted by Tav:
Thanks man.  I am laughing....I was trying to give you a break from all my questions and you are the first to jump in.  you're a good guy.  thanks.

Now that is going to Randy's head....J/K

What Randy said is good info..