Author Topic: Splitting feathers (Read 1115 times)

ranger 3 · « **on:** January 12, 2007, 06:12:00 PM »

What is the best way to split turkey feathers?

Strutter · « **Reply #1 on:** January 12, 2007, 06:15:00 PM »

I use a utility knife and start in the groove of the quill and go from there. The knife tip will usually follow the groove to the end.

fireman_3311 · « **Reply #2 on:** January 13, 2007, 01:54:00 AM »

me too!!!

Jim now in Kentucky · « **Reply #3 on:** January 13, 2007, 10:07:00 AM »

Same here.

dosbow56 · « **Reply #4 on:** January 13, 2007, 10:20:00 AM »

yep, then I put the side I'm going to use in a straight Bitz clamp and take the sanding block to it.....quick and easy.
Dave

Roy from Pa · « **Reply #5 on:** January 13, 2007, 11:43:00 PM »

I use a utility knife also, I have found it seems to work better if you cut on a piece of wood, and when you start the cut, push the tip of the knife blade into the wood, then pull the feather through the blade slowly. Then I too use a straight clamp and sand them on my belt sander.. web page

News:

Author Topic: Splitting feathers (Read 1115 times)

ranger 3

Splitting feathers

Strutter

Re: Splitting feathers

fireman_3311

Re: Splitting feathers

Jim now in Kentucky

Re: Splitting feathers

dosbow56

Re: Splitting feathers

Roy from Pa

Re: Splitting feathers

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS