3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: arrow weight  (Read 461 times)

Offline Llamma1

  • Trad Bowhunter
  • **
  • Posts: 106
arrow weight
« on: May 19, 2011, 10:20:00 PM »
Someone mentioned using rope instead of weight tubes to make your carbon arrows heavier.My arrows are 275 grain and 5/16 thick.My main question is how many grains per inch nylon rope end up being.
Logged
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.

Offline BOWMARKS

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1984
Re: arrow weight
« Reply #1 on: May 19, 2011, 10:33:00 PM »
Are you sure it was rope? Not weed wacker line?  
I do not know weight of either.
Logged
Kanati Long Bow 56"-45#@27"
Hoot's Long Bow 56"-45#@27"
Shrew Classic Hunter 56"-47#@28"


TGMM Family Of The Bow
United Bowhunters of Penna.
Compton Traditional Bowhunters
Professional Bowhunters Society

Offline Llamma1

  • Trad Bowhunter
  • **
  • Posts: 106
Re: arrow weight
« Reply #2 on: May 20, 2011, 07:36:00 AM »
Ya I think so.What is wacker line?
Logged
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.

Online Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12250
  • Contributing Member
    • Cavalier Pickups
Re: arrow weight
« Reply #3 on: May 20, 2011, 08:02:00 AM »
my suggestion is to forego internal carbon tube weights and load the front end up.  doing so will rarely, if ever, make any dramatic spine change.  and having added weight up front increases foc and directional arrow stability.  add weight easiest via steel screw-in adapters.
Logged
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline Tater 2

  • Trad Bowhunter
  • **
  • Posts: 294
Re: arrow weight
« Reply #4 on: May 20, 2011, 08:04:00 AM »
Logged
Compton Traditional Bowhunters
Colorado Traditional Archers Society
PBS Associate
Colorado Bowhunters Association

Offline awbowman

  • Trad Bowhunter
  • **
  • Posts: 3719
Re: arrow weight
« Reply #5 on: May 20, 2011, 09:28:00 AM »
X2 on the steel adapters that Mr. Rob mentioned.  High FOC.
Logged
62" Super D, 47#s @ 25-1/2"
58" TS Mag, 53#s @ 26"
56" Bighorn, 46#s @ 26.5"

Offline PaddyMac

  • Trad Bowhunter
  • **
  • Posts: 799
Re: arrow weight
« Reply #6 on: May 20, 2011, 02:37:00 PM »
That's the direction I'm going too. I just left a post on my local bulletin board service for old Easton 2216 aluminum shafts to foot my GT Trads with (and increase my FOC) and got a hit in less than a 1/2 hour.
Logged
Pat McGann

Southwest Archery Scorpion longbow, 35#
Fleetwood Frontier longbow, 40#
Southwest Archery Scorpion, 45#
Bob Lee Exotic Stickbow, 51#
Bob Lee Signature T/D recurve, 47#
Bob Lee Signature T/D recurve, 55#
Howatt Palomar recurve (69"), 40#

"If you leave archery for one day, it will leave you for 10 days."  --Turkish proverb

Offline awbowman

  • Trad Bowhunter
  • **
  • Posts: 3719
Re: arrow weight
« Reply #7 on: May 20, 2011, 02:47:00 PM »
Yep, Old glue on green razorheads with 100 grain adapters.  You have to use a drimmel tool to get the bleeders to fit.  Old Fred knew how to make a broadhead
Logged
62" Super D, 47#s @ 25-1/2"
58" TS Mag, 53#s @ 26"
56" Bighorn, 46#s @ 26.5"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©