3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Tapered Shafts??  (Read 540 times)

Offline Weekend Warrior

  • Trad Bowhunter
  • **
  • Posts: 562
Tapered Shafts??
« on: July 06, 2007, 08:32:00 PM »
Want to try some tapered spruce shafts..
I'm shooting a hybrid longbow 48# @27 With 125 gr tips.
Should I get 50-55 spine or 55-60 spine? 11/32
Logged

Online Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8251
Re: Tapered Shafts??
« Reply #1 on: July 06, 2007, 10:05:00 PM »
It's just a guess, but 55-60 would give you some latitude for tuning if needed you could use heavier heads to bring it to proper tune.
Logged
Hunt Sharp

Charlie

Offline Hatrick

  • Trad Bowhunter
  • **
  • Posts: 885
Re: Tapered Shafts??
« Reply #2 on: July 06, 2007, 10:42:00 PM »
Gary, that Mikuta is cut to center so Charlie is right on with his recommendation.

If the bow was cut before center you might go with a little lighter spine. The sitka spruce arrows I just built were for a 51# bow that is not cut to center... Dave
Logged
The scent of Autumn is like food to the hunters soul.

Offline Ron LaClair

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5405
Re: Tapered Shafts??
« Reply #3 on: July 06, 2007, 10:52:00 PM »
If your hybrid longbow has a fast flight or high performance string then you might even want to go 60+ on the arrow spine. Are you going to cut the shafts 28" bop?
Logged
We live in the present, we dream of the future, but we learn eternal truths from the past
When you were born, you cried and the world rejoiced. Live your life so that when you die, the world cries and you rejoice.
Life is like a wet sponge, you gotta squeeze it until you get every drop it has to offer

Offline Weekend Warrior

  • Trad Bowhunter
  • **
  • Posts: 562
Re: Tapered Shafts??
« Reply #4 on: July 06, 2007, 10:56:00 PM »
Ron
I'm shooting a 28 1/2 now..bop  
Thanks
Logged

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Tapered Shafts??
« Reply #5 on: July 06, 2007, 10:57:00 PM »
Yup, if ya go about 15#s over draw weight ya should be close if ya cut them 28"s, if ya cut them longer add about 4 or 5 pounds of spine for every inch over 28"s. Tell us what bow it and we may be able to be more specific. I had a Shrew that was 51#s at 28" and I draw that and shot 29" arrows that spined around 70#s. Shawn
Logged
Shawn

Offline Weekend Warrior

  • Trad Bowhunter
  • **
  • Posts: 562
Re: Tapered Shafts??
« Reply #6 on: July 06, 2007, 11:08:00 PM »
Thanks Guys

My bow is a Mikuta longbow
It is 58" long R/D and 48# @ 27"
Logged

Offline Ron LaClair

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5405
Re: Tapered Shafts??
« Reply #7 on: July 06, 2007, 11:12:00 PM »
String???
Logged
We live in the present, we dream of the future, but we learn eternal truths from the past
When you were born, you cried and the world rejoiced. Live your life so that when you die, the world cries and you rejoice.
Life is like a wet sponge, you gotta squeeze it until you get every drop it has to offer

Offline Weekend Warrior

  • Trad Bowhunter
  • **
  • Posts: 562
Re: Tapered Shafts??
« Reply #8 on: July 06, 2007, 11:14:00 PM »
Sorry
FF
Logged

Offline Ron LaClair

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5405
Re: Tapered Shafts??
« Reply #9 on: July 07, 2007, 07:41:00 AM »
The FF string usually means you need to bump it up a bit. If it was me I'd go with 60-65# shafts. Right now I'm shooting 70# tapered Sitka Spruce cut to 28" out of 51 and 53# bows. I could get by with 65# spine but I'm shooting 200gr's up front so I went with 70's.
Logged
We live in the present, we dream of the future, but we learn eternal truths from the past
When you were born, you cried and the world rejoiced. Live your life so that when you die, the world cries and you rejoice.
Life is like a wet sponge, you gotta squeeze it until you get every drop it has to offer

Offline Weekend Warrior

  • Trad Bowhunter
  • **
  • Posts: 562
Re: Tapered Shafts??
« Reply #10 on: July 07, 2007, 09:39:00 AM »
Thanks Ron
Do you think they would work with a 160 gr..
I'm thinking of trying some simmons 160 heads?
Or would it be a trial and error ??
Logged

Offline Hatrick

  • Trad Bowhunter
  • **
  • Posts: 885
Re: Tapered Shafts??
« Reply #11 on: July 07, 2007, 10:06:00 AM »
Gary, another suggestion would be to contact Paul Jalon of "Elite Arrows" who is a sponsor on this site. He will sell you 4 different spined completed arrows for $35 delivered that you can try out to see what works best. Might be money well spent. He's been making arrows for long time.
Logged
The scent of Autumn is like food to the hunters soul.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©