3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Tippit's Tree Stand Safety System  (Read 403 times)

Offline Whip

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 8189
Re: Tippit's Tree Stand Safety System
« Reply #20 on: November 23, 2011, 08:43:00 AM »
I really like the looks of that system.  The only downside I can see in my situation is when I have other people hunting my property.  I'm not sure I would want to supply them all with GriGri's and train them on their use.  It does seem like something that takes some practice.  In order for them to use the prusik knot system the rope would need to be tied off on the bottom.  And I can see where you wouldn't want that with the GriGri.  I guess if I just got into the habit of untying and retying the bottom of the static line each time I could make it work for both systems.
Great info!  One way or another, I can sure see myself getting one of these.
PBS Regular Member
WTA Life Member
In the end, it is not the years in your life that count. It's the life in your years. Abraham Lincoln.

Offline beyondmyken

  • Trad Bowhunter
  • **
  • Posts: 397
Re: Tippit's Tree Stand Safety System
« Reply #21 on: November 25, 2011, 12:01:00 PM »
This system looks great.  I will be purchasing some rope, grigri, carabiner and back up rope for prussiks.  I did have a concern about critters fraying the rope and started a new thread.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Tippit's Tree Stand Safety System
« Reply #22 on: December 03, 2011, 07:33:00 PM »
I really like Jeffs idea on the GriGri 2 and have acquired the setup. Since I use a climber, I wanted to get away from having to always pull the complete rope through the loop every time after putting it around the tree, I tied a locking Carabiner to the end of my rope and simply clip it around the rope.


 
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6239
Re: Tippit's Tree Stand Safety System
« Reply #23 on: December 03, 2011, 10:01:00 PM »
Bill,
How do you attach it to your harness?  Make sure you try it hanging from a couple of feet off the ground so you know you can reach the cam lever to allow yourself to be descended down the tree.  The more you use it the more comfortable you'll become with it.  

I find that I attach my harness to my life line at the base of the tree and then but my harness on because the GriGri is right behind my neck.  When I come down, I just pull all the rope out so I'm free of the GriGri at the bottom.

Good Luck...Jeff
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Tippit's Tree Stand Safety System
« Reply #24 on: December 03, 2011, 11:13:00 PM »
Jeff, my harness has a short endless strap attached between my shoulder blades. It will reach  almost to the top of my head. I attach it to the GriGri with another caribiner. It is attached before putting the harness on. I usually put the harness on before leaving the house and put the last layer of clothes on over it. I "chain link" the rope and put it in a bag hanging from my belt until I'm ready to climb.
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Hud

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2233
  • 360-921-5779
Re: Tippit's Tree Stand Safety System
« Reply #25 on: December 03, 2011, 11:24:00 PM »
Thanks for the great information, looks like a winner.  :thumbsup:    :thumbsup:
TGMM Family of the Bow

Online Gen273

  • Trad Bowhunter
  • **
  • Posts: 3515
Re: Tippit's Tree Stand Safety System
« Reply #26 on: May 15, 2012, 10:14:00 AM »
I am going to give this system a look. Thanks for the info!
Jesus Saves (ROM 10:13)

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Tippit's Tree Stand Safety System
« Reply #27 on: May 15, 2012, 03:07:00 PM »
Last winter I started using this harness instead of the full body system.


 


With Tippits belay system recommendation.

 

The belay is attached with a caribiner to the harness. The attachment point is in front rather than rear making access to it much easier..
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Jeff Roark

  • Trad Bowhunter
  • **
  • Posts: 288
Re: Tippit's Tree Stand Safety System
« Reply #28 on: May 15, 2012, 03:13:00 PM »
Bill,

That harness looks just like the 20feetup one. How much did you pay for it?

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Tippit's Tree Stand Safety System
« Reply #29 on: May 15, 2012, 09:13:00 PM »
Jeff, I can't remember exactly what it cost but was around $40. I ordered it from a mountain climbing equipment seller on the internet.
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Sharpend60

  • Trad Bowhunter
  • **
  • Posts: 287
Re: Tippit's Tree Stand Safety System
« Reply #30 on: May 15, 2012, 10:10:00 PM »
Regarding safety systems... only use dynamic ropes!
It stretches just a bit to ease the impact off the fall.

BTW.

I'm a professional rock climber.
I have utter confidence in the Gri-Gri. Forces generated in rock climbing are MUCH greater than any you could whip up in  tree hunt situation. I have taked 40 ft falls recently on a gri-gri worked just fine... I routinly whip around 50 ft off the ground with a single dynamic line and gri-gri.

Also...

A few years ago I posted regarding using climbing gear for tree stand stafty. Forum memebers tore me up for not using hunter specific gear..

If anyone has ???s you can PM me.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©