3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: cedar-shafts?  (Read 417 times)

Offline 3Feathers

  • Trad Bowhunter
  • **
  • Posts: 1188
cedar-shafts?
« on: January 03, 2012, 07:24:00 PM »
Where can i purchase some decent tapered cedar shafts?
Logged
HH Cheetah 66in. 48lb at 25in.
HH HalfBreed 66in. 57lb. at 27in.
HH Wesley Special  56lb. at 26in..
HH Big 5          64lb. at 28in.
HH Wesley Special 55lb. at 28in.
HH Redman         60lb. at 28in.
Simmmons sharks
2016 Legacys

Online Jim Wright

  • Trad Bowhunter
  • **
  • Posts: 1330
Re: cedar-shafts?
« Reply #1 on: January 03, 2012, 07:45:00 PM »
If you have trouble finding the tapered shafting and because "decent" Cedar shafts are hard to come by period, I would offer that Rod Kelley (406)756-5885 has some extremely fine parallel Cedar shafting. Getting it tapered should be easy enough.
Logged

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: cedar-shafts?
« Reply #2 on: January 03, 2012, 07:51:00 PM »
most of the sponsors here have them. 3Rivers, Raptor Archery to name a few.
Logged

Offline Terry Lightle

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2785
Re: cedar-shafts?
« Reply #3 on: January 03, 2012, 07:57:00 PM »
I get mine from Mike at The Nocking Point
Logged
Compton Traditional Bowhunters Life Member

Offline lpcjon2

  • Trad Bowhunter
  • **
  • Posts: 7673
Re: cedar-shafts?
« Reply #4 on: January 03, 2012, 07:59:00 PM »
Check with Rick at the feathered shaft he should be able to help you. His shop is in the sponsor banner up top.
Logged
Some people live an entire lifetime and wonder if they have ever made a
difference in the world, but the Marines don’t have that problem.
—President Ronald Reagan

Offline TAWL

  • Trad Bowhunter
  • **
  • Posts: 46
Re: cedar-shafts?
« Reply #5 on: January 03, 2012, 08:04:00 PM »
Lost Nation Archery.
Logged

Offline John Nail

  • Trad Bowhunter
  • **
  • Posts: 740
Re: cedar-shafts?
« Reply #6 on: January 03, 2012, 10:20:00 PM »
yep. nocking point
Logged
Is it too late to be what I could have been?

Offline Shakes.602

  • Trad Bowhunter
  • **
  • Posts: 3643
Re: cedar-shafts?
« Reply #7 on: January 03, 2012, 10:25:00 PM »
I Cant say here that "Decent Cedar Shafts Are Hard To Come By", Try Lost Nation. Larry & Janice are #1 and Mighty Nice Folks Too!   :thumbsup:
Logged
"Carpe Cedar" Seize the Arrow!
"Life doesn't get Simpler; it gets Shorter and Turns in Smaller Circles." Dean Torges
"Faith is to Prayer what the Feather is to the Arrow" Thomas Morrow
"Ah Think They Should Outlaw Them Thar Crossbows" A Hunting Pal

Offline cbCrow

  • Trad Bowhunter
  • **
  • Posts: 960
Re: cedar-shafts?
« Reply #8 on: January 04, 2012, 07:31:00 AM »
x2 for Lost Nation
Logged

Offline longbowman

  • Trad Bowhunter
  • **
  • Posts: 957
Re: cedar-shafts?
« Reply #9 on: January 04, 2012, 08:14:00 AM »
Check out the sponsor right at the top of this page, "Kustom King".  Easily the best tapered shafts out there.
Logged

Offline Uncle Buck

  • Trad Bowhunter
  • **
  • Posts: 550
Re: cedar-shafts?
« Reply #10 on: January 04, 2012, 08:21:00 AM »
Kustom King started out selling tapered shafts, they have been around at least 30 years so they must be doing something right
Logged

Offline Breakfast Boy

  • Corporate Sponsor
  • Trad Bowhunter
  • ****
  • Posts: 332
Re: cedar-shafts?
« Reply #11 on: January 04, 2012, 08:37:00 AM »
I don't think you can go wrong with either Kustom King or Lost Nation.
Logged
-Jameson

Membership Secretary
Compton Traditional Bowhunters

 www.comptontraditionalbowhunters.com

Offline Hobow

  • Trad Bowhunter
  • **
  • Posts: 292
Re: cedar-shafts?
« Reply #12 on: January 04, 2012, 01:18:00 PM »
Talk to Ted at Raptor Archery, he doesn't get his shafts from the common suppliers.  He has an independant mill that turns out very nice, high quality shafts for him.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©