3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Grizzly Stick Sitka  (Read 502 times)

Offline John Nail

  • Trad Bowhunter
  • **
  • Posts: 740
Grizzly Stick Sitka
« on: July 21, 2007, 07:10:00 AM »
OK, I bought some Sitkas. Trying to get them to fly from my 55lb Kadiak recurve. No matter how much weight I put up front, they have just a little wobble. I've checked and double checked for feather interference, and that isn't an issue. Raised and lowered nock points and brace height until I'm convinced that isn't it.  1920s, 2018s,2115(with 200gr head) and 65 spine woodies all fly fine.
How do you tune these goofy things?
Is it too late to be what I could have been?

Online Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8251
Re: Grizzly Stick Sitka
« Reply #1 on: July 21, 2007, 09:19:00 AM »
How's nock tightness, John?
Hunt Sharp

Charlie

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Grizzly Stick Sitka
« Reply #2 on: July 21, 2007, 09:28:00 AM »
Who fletched them?  Did they check them for the stiff side?
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline eagle24

  • Trad Bowhunter
  • **
  • Posts: 499
Re: Grizzly Stick Sitka
« Reply #3 on: July 21, 2007, 11:12:00 AM »
John,
I just sold a dozen sitkas for the same reason.  I just could'nt get them to fly right.  I bareshafted until I got the tip weight where they were slightly weak, but when I shot a fletched arrow I never could get it to shoot without seeing a slight wobble.  I thought I found the stiff spine seam and then as a last resort, I tried rotating the nock and shooting with each feather out, cock feather up, you name it.  I could'nt tell any difference no matter how I turned them.

Offline jonsimoneau

  • Trad Bowhunter
  • **
  • Posts: 2946
Re: Grizzly Stick Sitka
« Reply #4 on: July 21, 2007, 02:33:00 PM »
With a 55lb bow, you should not need too much weight up front with the sitkas.  Try going the other way.   You may have too much weight.

Offline John Nail

  • Trad Bowhunter
  • **
  • Posts: 740
Re: Grizzly Stick Sitka
« Reply #5 on: July 21, 2007, 04:47:00 PM »
Charlie, I filed the nocks to get just enough tightness to hold the arrow. I fletched them, and didn't check for a "Stiff side" You would think that isn't it, because at least one of them should be fletched on that side. Jon, I've shot 125, 145, 175, and 200gr points.
Is it too late to be what I could have been?

Offline katman

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3574
Re: Grizzly Stick Sitka
« Reply #6 on: July 21, 2007, 10:22:00 PM »
The seam in the grizzlysticks can be a problem, I switched from the stock nock to the Easton unibushing and G nock so I could rotate them while bare shafting each shaft fine tuning each arrow before marking the cock feather spot and fletching. Rotating the nock had a dramatic effect on spine for me. Like Ed likes to say, they fly like darts.
shoot straight shoot often

Offline John Nail

  • Trad Bowhunter
  • **
  • Posts: 740
Re: Grizzly Stick Sitka
« Reply #7 on: July 21, 2007, 10:39:00 PM »
hmmmm. Well, I gave up. I like the way the 65sp Elite woodies fly anyway.
Thanks to everyone for your input
Is it too late to be what I could have been?

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©