3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: How do you tune?  (Read 275 times)

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
How do you tune?
« on: February 13, 2012, 07:06:00 PM »
Trying to get my new bow dialed in and I'm curious how you all like to tune.  Watching arrow flight, bareshaft, paper?

Offline JamesKerr

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3575
Re: How do you tune?
« Reply #1 on: February 13, 2012, 07:51:00 PM »
I use O.L. Adcock's method of shooting bare shafts along with fletched shafts and tuning based on how they group or don't group together. I am not a big advocate of paper tuning as I don't have a good enough release to send even a perfectly tuned bare shaft straight (like a fletched arrow flies) all the time.
James Kerr

Offline Old Chief

  • Trad Bowhunter
  • **
  • Posts: 442
Re: How do you tune?
« Reply #2 on: February 13, 2012, 08:58:00 PM »
I also use O.L. Adcock's method and check field point with broadheads using flecthed shafts at the end.  Nice to see I am not the only one having trouble with paper tuning.

Offline ishoot4thrills

  • Trad Bowhunter
  • **
  • Posts: 3445
Re: How do you tune?
« Reply #3 on: February 13, 2012, 09:23:00 PM »
Quote
Originally posted by JamesKerr:
I use O.L. Adcock's method of shooting bare shafts along with fletched shafts and tuning based on how they group or don't group together. I am not a big advocate of paper tuning as I don't have a good enough release to send even a perfectly tuned bare shaft straight (like a fletched arrow flies) all the time.
Here's the link. Click on it and then click on "bow tuning":

 http://bowmaker.net/index2.htm
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

Offline Bowwild

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5433
Re: How do you tune?
« Reply #4 on: February 13, 2012, 09:27:00 PM »
I start by setting the bow up according to the bowyer's recomendations regarding nock locator and brace height.

Then I go to Stu's Calculator to build an arrow that should shoot well. Then I paper tune from 6, 9, and 21 feet.

My last and most crucial test is to shoot broadheads and field tips at 20-30 yards. (Broadheads first to avoid damaging arrows).

SO far this has worked out very well for me.

Good luck and I wish I was asking your question when I first started so many years ago!

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: How do you tune?
« Reply #5 on: February 13, 2012, 10:15:00 PM »
OL 's Bareshaft method.

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: How do you tune?
« Reply #6 on: February 13, 2012, 10:42:00 PM »
I set the brace height for a bow per the bowyer's recommendation. Then I use Stu Miller's calculator program for a starting point.

Then I shoot an arrow to see where the arrow is hitting on the target. I then fine tune by adjusting the brace height.

When the arrow is hitting where I'm looking and "seems" to be flying like a dart, I paper tune.

Then comes a broadhead tipped arrow to see if it's hitting the same place I'm aiming at. If it does, then I paper tune again only this time with the broadhead tipped arrow.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline Red Beastmaster

  • Trad Bowhunter
  • **
  • Posts: 1766
Re: How do you tune?
« Reply #7 on: February 13, 2012, 10:51:00 PM »
First I start with an arrow that matches my bow weight. The length is 1" longer than my draw, always a 125gr point or broadhead.

For the bow, I set my nock at 5/8", brace is set from the crack of my wrist to the tip of my middle finger in the deepest part of the grip. I might be lucky but 90% of every bow I ever owned shot perfectly at that setting. The others required a few more twists to raise the brace a bit.

I refuse to tinker with what works. This works for me, every time.
There is no great fun, satisfaction, or joy derived from doing something that's easy.  Coach John Wooden

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: How do you tune?
« Reply #8 on: February 13, 2012, 11:12:00 PM »
paper
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline elknutz

  • Trad Bowhunter
  • **
  • Posts: 853
Re: How do you tune?
« Reply #9 on: February 14, 2012, 01:32:00 AM »
I probably go overboard, but I bare shaft, paper tune and broadhead tune.  It takes some time but I enjoy tinkering with them and I hate arrows that don't fly straight.  I'm on board with OL's method.
"There is no excellence in archery without great labor" - Maurice Thompson
"I avoid anything that make my dogs gag" - Dusty Nethery

Offline stujay

  • Trad Bowhunter
  • **
  • Posts: 2192
Re: How do you tune?
« Reply #10 on: February 14, 2012, 02:56:00 AM »
I use OL's method as well.

Offline don_h

  • Trad Bowhunter
  • **
  • Posts: 162
Re: How do you tune?
« Reply #11 on: February 14, 2012, 03:01:00 AM »
Boyers recommended brace height range and bare shaft till nock is correct and bow is happy, then silencers and feathers.

Offline Dan Adair

  • Trad Bowhunter
  • **
  • Posts: 331
Re: How do you tune?
« Reply #12 on: February 14, 2012, 04:27:00 AM »
I like to see how well it'll zip an arrow through a black bear first  :)

Offline cbCrow

  • Trad Bowhunter
  • **
  • Posts: 960
Re: How do you tune?
« Reply #13 on: February 14, 2012, 07:28:00 AM »
I usually set bow to reccomended brace hgt, go to Stu's and put all the  proper  inputs in,make up the arrow, paper tune at 10'. Sometimes I have to tinker to get just so, usually nock hgt,paper test again than make up a BH and see how it flys and make adjustments as necessary.  :thumbsup:    :archer:

Offline JR Williams

  • Trad Bowhunter
  • **
  • Posts: 259
Re: How do you tune?
« Reply #14 on: February 14, 2012, 01:08:00 PM »
OL's Bareshaft Method for me, first with field points and then follow up with broadheads. It has worked great for me so far.
God Bless

Numunuu

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©