2016 setup for 49-51# recurves

[Pokerdaddy]

Hi All.  I'm working with some 2016's I've got here, setting them up for two of my recurves, 49# and 51#.

If anyone is using 2016's for these draw weights, I'd love to hear how you've got them set up, especially point weight.

Thanks.

I should add:  I really like the way 125 up front is flying for me, but 175 (where I'd like to be) is just a whisker weak.  Think maybe I should try some 2018's?

[Pops]

I shoot 2016's at that weight with 125 up front
they fly great. I got a pass thru on my last bear with this set up. I think 2018 is too stiff

[Weasel]

What's your draw length?

[ron w]

47# @ 29" 60" Schafer Silvertip, full length 2016 with 125 up front. They are working real well with 4" shield cut feathers.

[RC]

I draw 27" and with bows in that weight I shoot 190 grain interceptors.RC

[Pokerdaddy]

Thanks guys.  I should have added, 28" draw length.  Sounds like I'm good to go! Thanks for the confirmation.

[Biathlonman]

I've got a #50@28, I draw 28.  I get perfect papertuning with a 30.5" with 145 and at 30" with 175.

[PICKNGRIN]

I have had good luck with 175 grains up front.  28 1/2" arrow, 45 and 50# bows.

2018s with 200g (BH & Insert) up front would work fine. I shoot 2016s with 200g up front out of 42-44# bows and they fly like darts.

[huskyarcher]

I shoot 2016s at 28in, while drawing 28in, and throw 125grs u front. The fly well, they have killed many, many, animals.

[Gator1]

Andrew I hate to jumpin, but I'm shoting my 45lb RER and the 2016's I have are cut to 28 1/2 BOP...

I'm thinking too stiff at my 28" draw at 45lbs.

What is the length of a full length 2016 Legacy these days?

[ron w]

Mine were just over 31 1/2", Gator what do you have for point wieght.

[Gator1]

Ron,

I have up to 175 Grain Pt Weight.. I'm thinking 1916's might be better and not have to Load up the front so much.

[Pat B.]

RC, are you using aluminum or steel adapters with those Interceptors.. If steel what weight?

[ron w]

Gator, try leaving them an inch longer with the same point weight!

[Pokerdaddy]

I should point out, my 2016's are 29" BOP and I'm drawing 28".  I really like the flight I'm getting with 125grains out of the 49-50# recurves.  Gonna get some 2018's to see how much point weight I can add...maybe even play with a little more arrow length.

I just recently started playing with aluminum.  Had been shooting GT's (which work fine) but I'm really enjoying the feel and flight of aluminum.

[PeteA]

I have a 50@28 Bear Takedown, I draw 27.5 and shoot 2016s 3-4 inch feathers, cut to 29.5 with 125 gr heads. Shoot split finger. I shoot the same arrows for my 46@28 Predator Hunter and 45@28 Kodiak Hunter.

[Brianlocal3]

im shooting darts out of my NM Huron with 29" 2016 51@28 im drawing 27" 125gr up front. But they fly way way weak from my 56# Superior at 28" even with 100gr up front. It has me baffled too.  I think you will be fine with your setup