3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Making a Leather Tab  (Read 311 times)

Offline Caughtandhobble

  • Trad Bowhunter
  • **
  • Posts: 1661
Making a Leather Tab
« on: May 25, 2012, 04:31:00 PM »
Hey Yall,

I thought that I would share how I make a leather tab for anyone that's interested. It's really simple to make a good tab that is custom fit for you.

The materials needed are a good piece of leather, sharp knife, pattern of desired tab, good leather conditioner, Bohning Seal Tite string wax, the one with silicone, leather lace.

-Trace pattern on leather
-Cut out tab (leave the finger hole small)
-Soak in water
-Dry in sun light
-Apply leather conditioner
-Dry in sun light again
-Apply leather conditioner again
-Dry in sun light
-Apply Bohning wax
-Soak in water, then shoot while tab is wet and it will form to your hand.
-Punch a hole in the top of tab and use leather lace to make a loop for hanging it on your bow, you'll never loose the tab if you do this.
-Apply Bohning wax one more time after the tab dries.

Once you have done this you will have a tab that will be very slick and it will last a very long time. Good luck and have fun making your own tabs;)b
 
 
 
 
 
 

Offline cbCrow

  • Trad Bowhunter
  • **
  • Posts: 960
Re: Making a Leather Tab
« Reply #1 on: May 25, 2012, 05:14:00 PM »
Thanks for sharing, thats even better than the way I make. Thanks again!

Offline BaldingEagle

  • Trad Bowhunter
  • **
  • Posts: 545
Re: Making a Leather Tab
« Reply #2 on: May 25, 2012, 05:17:00 PM »
:thumbsup:
"It is the difficulties of archery that make it so interesting to true archers."
Archery-Badminton Library

Offline TxAg

  • Trad Bowhunter
  • **
  • Posts: 2910
Re: Making a Leather Tab
« Reply #3 on: May 25, 2012, 05:30:00 PM »
Do you stick your hand through the loop so that it rests on your wrist while shooting?

After looking at your pics, I thought that would be a nice feature. Like you said..can't lose it on the bow and then you couldn't lose it on your hand.

Offline Caughtandhobble

  • Trad Bowhunter
  • **
  • Posts: 1661
Re: Making a Leather Tab
« Reply #4 on: May 25, 2012, 05:47:00 PM »
No I just let it hang down while I'm shooting, although that's a good idea. I just make it big enough to go over the limb then take it back between the limb a string to secure it. I don't ever loose tabs anymore this way.

Offline mississippidave

  • Trad Bowhunter
  • **
  • Posts: 113
Re: Making a Leather Tab
« Reply #5 on: May 25, 2012, 05:52:00 PM »
sweet

Offline Chaser

  • Trad Bowhunter
  • **
  • Posts: 96
Re: Making a Leather Tab
« Reply #6 on: May 25, 2012, 06:53:00 PM »
Thanks for sharing. I'm going to try making one.  :thumbsup:
Jose =>>>>>---------->
Bear Montana longbow 52#@27"
80' Howatt Hunter 61#@27"
06' Bear Super Kodiak 57#@27"

Offline Caughtandhobble

  • Trad Bowhunter
  • **
  • Posts: 1661
Re: Making a Leather Tab
« Reply #7 on: May 25, 2012, 07:09:00 PM »
Quote
Originally posted by Chaser:
Thanks for sharing. I'm going to try making one.   :thumbsup:  
Give it a shot, they're really easy to make. There's just some self gratification about making you own traditional equipment.

Offline JAG

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2129
Re: Making a Leather Tab
« Reply #8 on: May 25, 2012, 10:06:00 PM »
:clapper:    :clapper:    :clapper:
IBEP - Chairman Alabama
"May The Good Lord Keep Your Bow Arm Strong and Your Heart and Arrows True!"
TGMM Family of the Bow
PBS Regular Member
Compton Member

Offline CrayZ 1 2NV

  • Trad Bowhunter
  • **
  • Posts: 19
Re: Making a Leather Tab
« Reply #9 on: May 25, 2012, 10:17:00 PM »
very good post! I'm going to try and make one too since my current platform tab is for split fingers and I need a 3under  :)

Offline ripforce56

  • Trad Bowhunter
  • **
  • Posts: 484
Re: Making a Leather Tab
« Reply #10 on: May 26, 2012, 11:35:00 AM »
I just made these 2 tabs from some Oil tanned leather that I bought a Tandy leather, I added a Can't Pinch seperator from a couple of tabs that I had laying around!


 
BirchBark Rovers Custom Quivers 
Bama Royal Expedition T/D  #00027
Root Target Master 66in 40@28
SF Forged Plus/Carbon Elite 40lb Limbs 68in ILF
Schramm Recurve 62in 46@28


Schramm 62in Recurve 46@28

Offline Caughtandhobble

  • Trad Bowhunter
  • **
  • Posts: 1661
Re: Making a Leather Tab
« Reply #11 on: May 26, 2012, 01:01:00 PM »
NICE!!!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©