3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Arrow Dipping  (Read 451 times)

Offline cedarshaft

  • Trad Bowhunter
  • **
  • Posts: 61
Arrow Dipping
« on: August 03, 2007, 11:54:00 AM »
I haven't been able to get the right consistency of Bohning paint while dipping my arrows. The dip seems to break off in pieces. Has anyone had any luck in using automotive spray laquer for their arrows? I read sometime ago that it makes an acceptable dip. It certainly would smell a lot less and the wife wouldn't keep asking about the awful smell in the garage.

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: Arrow Dipping
« Reply #1 on: August 03, 2007, 12:02:00 PM »
Bohning paint works fine for dipping......it sounds like you are having a cross contamination problem..........auto paint works, but the smell can be a problem too.
I use water based polyacrylic dip--non flammable and no smell. Won't melt pvc dip tubes, and dries to a very durable finish. Talk to Ted at Raptorarchery.com

Offline Peachey

  • Trad Bowhunter
  • **
  • Posts: 316
Re: Arrow Dipping
« Reply #2 on: August 03, 2007, 12:04:00 PM »
What kind of arrow are you trying to dip, I have had trouble getting it to stick to certain carbon arrows.

Offline ishiwannabe

  • Trad Bowhunter
  • **
  • Posts: 4360
Re: Arrow Dipping
« Reply #3 on: August 03, 2007, 12:28:00 PM »
I use bohning for dipping, and had to get the bohning thinner to thin it out. Works fine now. Are you cleaning the Shafts before dipping? I dont mean offense, but I didnt do it the first few sets of arrows....  :D  Now I use Denatured alcohol before I dip.
"I lost arrows and didnt even shoot at a rabbit" Charlie after the Island of Trees.
                         -Jamie

Offline Grant Young

  • Trad Bowhunter
  • **
  • Posts: 1049
Re: Arrow Dipping
« Reply #4 on: August 03, 2007, 04:42:00 PM »
What Bjorn and Ishi said. I shoot alums. and haven't had a problem in years except when I accidentally used a standard lacquer thinner. I used auto lacquers and other finishes but nothing held up as well as Bohning when I burned the fletching. I don't know about other materials but the Fletch Lac doesn't work well on Grizzly Stiks and according to Ed at ABC tape is about all that does.Good luck,
                                    Grant

Offline Shakes.602

  • Trad Bowhunter
  • **
  • Posts: 3643
Re: Arrow Dipping
« Reply #5 on: August 03, 2007, 04:48:00 PM »
I use a Good Spray Paint, Taping & Papering off the Front of the Arrow, Get a Good Looking Arrow color, and I dip my Woodies in Minwax Poly Water Based Sealent on them. After everything is GOOD & Dry, I use some Johnsons or Good Old Turtle Wax to make the Arrows Slicker than Owl Snot on Linoleum!!
           Just my 2 Cents, Good Luck to You!!
"Carpe Cedar" Seize the Arrow!
"Life doesn't get Simpler; it gets Shorter and Turns in Smaller Circles." Dean Torges
"Faith is to Prayer what the Feather is to the Arrow" Thomas Morrow
"Ah Think They Should Outlaw Them Thar Crossbows" A Hunting Pal

Offline Artur

  • Trad Bowhunter
  • **
  • Posts: 101
Re: Arrow Dipping
« Reply #6 on: August 07, 2007, 12:22:00 AM »
I use DEFT spray lacquer, 2-4 coats, after dry I then smooth with #0000 steel wool (#0000 steel wool between coats, as well). The only times I have problems with arrows sticking in target butts is when those butts have glue in them. Fibers from compressed cardboard butts will stick, sometimes, but they are easily removed.

I haven't been able to afford any "real" arrow dips or the needed equipment...
Artur - Archer/Fletcher; To Live Is To Learn, To Learn Is to Live

Offline Rick Perry

  • Trad Bowhunter
  • **
  • Posts: 324
Re: Arrow Dipping
« Reply #7 on: August 07, 2007, 11:41:00 AM »
I just dipped 1 1/2 doz cedars yesterday  ............... Bohning Fletchlac (white) ............. still works fine ,like always  ............. BTW ....... I have always used standard lacquer thinner , never had a problem with that ........... I usually dip twice ( 2 coats )
"Pick a spot"

    RLP

Offline cedarshaft

  • Trad Bowhunter
  • **
  • Posts: 61
Re: Arrow Dipping
« Reply #8 on: August 13, 2007, 02:49:00 PM »
Thanks to all who responded to my problem and gave me some good advice. Traditional archers are the best.

Offline Smallwood

  • Trad Bowhunter
  • **
  • Posts: 1368
Re: Arrow Dipping
« Reply #9 on: August 14, 2007, 02:56:00 PM »
you can use MEK mythel ethel ketone(sp?) from the hardware store, it's the same as the bohning brand only alot cheaper. also, i use bohnings shaft cleaner before dipping.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©