Sharpening muzzy phantom beeders

[aquafang]

What are some suggestions to sharpen the bleeder blades on the phantom 4 blade 125gr.

[lpcjon2]

I dont have those heads but I do get wet and dry sand paper from the hardware store and use that to add a razor edge to blades and knives. The higher the grit # the better, and you can glue it on a small thin piece of scrap wood so you dont get cut.A little drop of water and and go gently and they will get sharp.JMHO

[JimB]

The KME broadhead sharpener has a second set of jaws just for bleeders.It should put a razor's edge on them.The regular jaws would be perfect for sharpening your main blade.I can't recommend the KME highly enough.Super product and super support.

[aquafang]

Thanks for the input.  First ?... What is and how do i find a KME?
Second ? Is how do i hold the bleeders ti get the right angle if i sharpen them on wet dry sandpaper?

Thanks guys!

[lpcjon2]

You can hold them with vise grips

[bluegrassbowhunter]

Originally posted by lpcjon2:
You can hold them with vise grips

Yep,this is how I hold them.
But I pull mine through a Radaa wheelie sharpener & then polish them on a buffing wheel..They come out "RAZOR" sharp...& alot cheaper than buying new bleeder blade..

[NoCams]

Aquafang, go to the sponsor list at the top of the page and scroll to KME. It will be the best broadhead sharpener you ever bought. I use the knife sharpener for my knives and any two blade broadhead. The advantage of the broadhead sharpener is the ability of sharpening bleeders. Cannot do that with the knife sharpener.

If you are not dead set on shooting a 4 blade with bleeders buy the knife sharpener and you get double duty out of it and more bang for your buck IMHO. You will never have a sharper knife than a KME sharpened blade ! You cannot get better customer service than Ron @ KME either. Best tool ever devised on this planet IMHO.

[Recurve50 LBS]

KME is a sponser on this site. Check out the web site. KMESharp.com
Good solid product made in the USA not China.
Keep the vise grips in your tool box.

[dennis rice]

KME is what i use

[hvyhitter]

needle nose vice grips here........

[cuboodle]

I shoot bear razorheads with bleeders I use the KME for the bleeders no problem like the others great product fast shipping
Watch the videos on there site