Originally posted by buckeyebowhunter: Can heads glued with two part epoxy be removed with heat?
Originally posted by joe skipp: Never had any problems with Ferrule Tite when hot melting heads to adapters. I clean the adapters with 91% Iso to remove any film or oil. Apply enough hot melt, heat well and push the head on.Now, the smaller or shorter BHA that Bear Razorheads need, I would use JB Weld or some form of epoxy. Too much Hot Melt and it could "push forward" when heated and head applied. This will make it difficult to install bleeder blades.
Originally posted by Kris: Kimsha Quick-Stick works really well. Kris