3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: removing nocks?  (Read 414 times)

Offline 21st century 1

  • Trad Bowhunter
  • **
  • Posts: 16
removing nocks?
« on: August 09, 2007, 10:45:00 PM »
does anyone have any suggestions on how to remove nocks from cedar arrows without staving up the shaft?i need to put some brighter nocks on.

Offline ishiwannabe

  • Trad Bowhunter
  • **
  • Posts: 4360
Re: removing nocks?
« Reply #1 on: August 09, 2007, 10:51:00 PM »
Little bit of heat.....some guys use knives too. I usually heat the nock til it gets "shiney", then pull it off with pliers. You can use boiling water too from what I understand.
"I lost arrows and didnt even shoot at a rabbit" Charlie after the Island of Trees.
                         -Jamie

Offline TexMex

  • Trad Bowhunter
  • **
  • Posts: 2199
Re: removing nocks?
« Reply #2 on: August 10, 2007, 08:02:00 AM »
I use a very sharp knive.

Offline Ric O'Shay

  • Trad Bowhunter
  • **
  • Posts: 2143
Re: removing nocks?
« Reply #3 on: August 10, 2007, 08:07:00 AM »
Dip the nock in boiling water for 10 to 15 seconds, then twist it off with pliers.

Danny
I tremble for my country when I reflect that God is just.   - Thomas Jefferson

Offline Yellowsnake

  • Trad Bowhunter
  • **
  • Posts: 94
Re: removing nocks?
« Reply #4 on: August 10, 2007, 08:38:00 PM »
I just cut mine off with a small, sharp knife.

Offline Rufus

  • Trad Bowhunter
  • **
  • Posts: 488
Re: removing nocks?
« Reply #5 on: August 10, 2007, 09:21:00 PM »
I use my propane torch on low, low, low and pull off with pliers or peel off gently with a knife.
Live simply. Love generously. Care deeply. Speak kindly.

Offline portugeejn

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 895
Re: removing nocks?
« Reply #6 on: August 10, 2007, 10:31:00 PM »
I use a propane torch also, then pull off with pliers, using a twisting motion.  Works well, just don't hold them over the flame too long!!  
Ron

Offline Hot Hap

  • Trad Bowhunter
  • **
  • Posts: 3152
Re: removing nocks?
« Reply #7 on: August 10, 2007, 11:27:00 PM »
I'm with TexMex and Yellowsnake. Hap

Offline Frank V

  • Trad Bowhunter
  • **
  • Posts: 1183
Re: removing nocks?
« Reply #8 on: August 11, 2007, 02:16:00 AM »
I also use a knife. I use a serrated blade being very carefull to follow the taper. Frank
U.S.A. "Ride For The Brand Or Leave."

Offline Artur

  • Trad Bowhunter
  • **
  • Posts: 101
Re: removing nocks?
« Reply #9 on: August 11, 2007, 03:10:00 AM »
I wait until they break off... There is a tool available for cleaning up the nock taper, I got it from FS Discount Archery  http://fsdiscountarchery.com/  a looong time ago -- item number 145A in their sales catalog number 42. I don't know if they still have the item in stock, or where else it might be found, but it sure is slick for removing those tiny bits of plastic and glue.
Artur - Archer/Fletcher; To Live Is To Learn, To Learn Is to Live

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©