3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Stuffing Aluminum Arrows for Weight  (Read 263 times)

Offline False Cast

  • Trad Bowhunter
  • **
  • Posts: 177
Stuffing Aluminum Arrows for Weight
« on: September 21, 2012, 06:03:00 PM »
I tried the search function and didn't find anything definitive so I thought I'd ask you members. As the title says, has anybody had any good results filling aluminum arrows for additional weight?

I've heard about weed trimmer rope, spray foam, packing-type foam, etc. I don't want anything to rattle around in my arrows but if I could get another 100 grains of weight in my 27.5" 2016's (without spending much money) it would be great! I've seen the weight rod setups but they're all sized for carbon.

If I end up having to purchase new arrows or something, so be it, but I thought I would present this question to the brain trust here before I dropped any cash.

Thanks in advance!

Offline twigflicker

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 513
Re: Stuffing Aluminum Arrows for Weight
« Reply #1 on: September 21, 2012, 07:10:00 PM »
I used packing peanuts one year... was using 2213 and not happy with the weight... a packing peanut weighs about 5 grains... take a thin dowl rod and roll them up and slide them in... 20 and you have your 100 grains...

Looks funny when the arrow breaks though... LOL

Jonathan
TGMM - Family of the Bow
PBS Associate

Offline lilbobby

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 581
Re: Stuffing Aluminum Arrows for Weight
« Reply #2 on: September 21, 2012, 08:54:00 PM »
The weight tubes at 3 rivers will fit your 2016's. I use them in my 1916's, I'll pinch them in about 4 to 5 different places but running opposite of each other. Then I use a little goat tuff glue on every pinch point as well as the first end going in. I've had only one arrow rattle after hundreds of shots. I use the 3 gr per inch, it didn't affect the spine that I could tell. Read the questions on there web site, it should tell you what size to get.
Conny

Offline khardrunner

  • Trad Bowhunter
  • **
  • Posts: 1729
Re: Stuffing Aluminum Arrows for Weight
« Reply #3 on: September 21, 2012, 09:26:00 PM »
I used aquarium tubing successfully.
I Corinthians 9 24-25
...run in such a way so as to obtain the prize!

Offline SELFBOW19953

  • Trad Bowhunter
  • **
  • Posts: 1461
Re: Stuffing Aluminum Arrows for Weight
« Reply #4 on: September 21, 2012, 09:46:00 PM »
X2 on the aquarium tubing.
SELFBOW19953
USAF Retired (1971-1991)
"Somehow, I feel that arrows made of wood are more in keeping with the spirit of old-time archery and require more of the archer himself than a more modern arrow."  Howard Hill from "Hunting The Hard Way"

Offline False Cast

  • Trad Bowhunter
  • **
  • Posts: 177
Re: Stuffing Aluminum Arrows for Weight
« Reply #5 on: September 21, 2012, 10:07:00 PM »
Thanks everyone.

What size aquarium tubing would be best for my arrows and what do you do to keep the tubing from rattling?

Offline Dave Lay

  • Trad Bowhunter
  • **
  • Posts: 1556
Re: Stuffing Aluminum Arrows for Weight
« Reply #6 on: September 21, 2012, 10:09:00 PM »
I have used braided nylon rope with great results burn one end closed and use a wire to push it into the shaft no rattle or movement it even quiets the arrow similar to a woodie
Compton traditional bowhunters
PBS regular
Traditional bowhunters of Arkansas
I live to bowhunt!!!
60” Widow SAV recurve 54@28
60” Widow KBX recurve 53@27
64” DGA longbow 48@27

Offline Longbowz

  • Trad Bowhunter
  • **
  • Posts: 368
Re: Stuffing Aluminum Arrows for Weight
« Reply #7 on: September 21, 2012, 10:16:00 PM »
3 rivers sells weight tubes and brass inserts.

You might also ask this in the Dangerous game forum, it has been discussed there several times.
I find the older I get, the less I used to know!

Offline Davesea

  • Trad Bowhunter
  • **
  • Posts: 279
Re: Stuffing Aluminum Arrows for Weight
« Reply #8 on: September 21, 2012, 10:28:00 PM »
Better just to put the weight into the point.   I use 200 grn points and broad heads.  Reduced my feather size in half too.
Dave
"Anyone can make a bow, but it takes skill and experience to make an arrow"  ISHI

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©