Weight tubes making noise

[quackersnacker]

I just received and installed some 3gpi tubes, from 3R, into my Gold Tips and I'm getting noise from 2 of them that were quiet before.  Several of the tubes were splitting when I received them.  I cut off both ends and thought that would take care of them.  The 5gpi tubes have had no such issues.  Sadly,     I put a little fletch tite platinum on them before installation and am wondering how I'll get them back out. Has anyone else had this happen.
Thanks

[Cherokee Scout]

If you are only getting noise from two of them, maybe they were cut slightly too short and are moving around inside the shaft.

[Otto]

First question I ask is "Did you get the correct diameter tubes for the arrows you're shooting?"

They make 2 different tube diameters for various brands of carbon shafts.

[Jason R. Wesbrock]

Pinch the tubes every couple inches, alternating 90 degrees with every pinch. This will make them snug inside the shaft and sould eliminate any rattling.

[quackersnacker]

Wow, I posed this question to 3rivers and a couple of replacement tubes just showed up at my door!!       I'll try and remove the offending tubes and install 2 new ones.  I'll try the 'pinch' trick, Jason.
Thanks