3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Beman CENTERSHOT ??????  (Read 741 times)

Offline Bullfrog 1

  • Trad Bowhunter
  • **
  • Posts: 744
Beman CENTERSHOT ??????
« on: January 06, 2013, 10:50:00 AM »
I just saw these on their site. Guess these are replacing the MFX?  They are lighter weight. i cant believe they would stop making the MFX, had to be a huge seller for them. Anyone know the scoop?  BILL

Offline Tyler C. Moore

  • Trad Bowhunter
  • **
  • Posts: 523
Re: Beman CENTERSHOT ??????
« Reply #1 on: January 06, 2013, 11:40:00 AM »
I seems to me that they simply moved the mfx concept into the Easton line "axis traditional". it makes sense since the mfx was in the Eason price range rather than the more affordable Beeman price range. if these new Beemans  are just as pricey I am just as confused.
Tyler C. Moore

Offline Bowwild

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5433
Re: Beman CENTERSHOT ??????
« Reply #2 on: January 06, 2013, 01:25:00 PM »
I shot MFX for the past three years. I have the new Trads now. The new ones seem to have a slightly smoother finish and they might be a tiny bit more narrow? I don't have a micrometer so I don't know for sure.  The new trad is about 25 grains lighter at my 27" BOP arrow length.

Offline LCH

  • Trad Bowhunter
  • **
  • Posts: 502
Re: Beman CENTERSHOT ??????
« Reply #3 on: January 06, 2013, 01:33:00 PM »
Bowwild do you have the new easton trads.? Are they the same weight?LCH

Offline Bowwild

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5433
Re: Beman CENTERSHOT ??????
« Reply #4 on: January 06, 2013, 02:56:00 PM »
LCH,
I just weighted 2, uncut arrows:

1.  500 spine MFX that was 31.5" long without inserts but with 3, 5" shield cut feathers. 319 grains.

2. 500 spine new Traditional that was also uncut with 3, 5" parabolic feathers. This arrow is about 3/8" shorter out of the box than the MFX. It weighed 298 grains.

When I made up my first of the New Trads for hunting with identical  inserts and the same length as my MFX arrows I found that the MFX was 505 grains and the new Axis Trad was 484.  Both had 100 grain brass inserts and 125 grain field points.

So, the new Trad seems to be 5% lighter.

Offline Ryan Sanpei

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3114
Re: Beman CENTERSHOT ??????
« Reply #5 on: January 08, 2013, 09:27:00 PM »


The Beman Center Shot arrows do not use X nocks and the HIT insert.  They use the "H" size nocks and RPS inserts, similar to the ST Excels.  The .400 spine that is in the picture is 9.6 gpi

They will also offer a 75/50 gr bass RPS insert for the Center Shot.

If I'm not mistaken, the Easton AXIS Traditional shafts will replace the Beman MFX.  The only weight comparison I have currently, is of the .600 spine.  My wife's .600 AXIS Trad Shafts are 7.9 gpi and the old Beman MFX were 8.0 gpi.

Offline Hoyt

  • Trad Bowhunter
  • **
  • Posts: 1413
Re: Beman CENTERSHOT ??????
« Reply #6 on: January 09, 2013, 07:18:00 AM »
This info is kinda jumbled..but you can figure it out.

Axis Traditional Carbon Shafting Specifics
Spine   Point   GPI   Length   Insert   Nock   Carbon
Collar
   Nock
Collar
600   9/32"   7.9   30 ½"   75-50gr   X   E   --
500   9/32"   8.9   31"   75-50gr   X   F   --
400   9/32"   9.8   31 ½"   75-50gr   X   F   --
340   9/32"   10.3   32"   75-50gr   X   G   --
Straightness      ±.003"        Weight    ±2gr
Adjustable 75-50gr brass HIT inserts

Beman MFX Classic Arrow Specs:
340 - 11.2 gpi., uses 9/32" diameter field point, BAR6 Broadhead Adapter Ring
400 - 10.4 gpi., uses 9/32" diameter field point, BAR5 Broadhead Adapter Ring
500 - 9.7 gpi., uses 9/32" diameter field point, BAR5 Broadhead Adapter Ring
600 - 8.0 gpi., uses 17/64" diameter field point, BAR3 Broadhead Adapter Ring
Adjustable 75-50gr brass HIT inserts


Beman CenterShot™ Carbon Shafting Specifics
Spine   Point   GPI   Length   Insert   Nock   Carbon
Collar
   Nock
Collar
600   9/32"   7.1   30 ½"   75-50gr   H   A   A
500   9/32"   8.3   30¾"   75-50gr   H   L   --
400   9/32"   9.6   31"   75-50gr   H   B   B
340   9/32"   10.3   31½"   75-50gr   H   C   C
Straightness      ±.003"        Weight    ±2gr
Pre-installed H Nocks

HP  75/50 Brass Break-Off Inserts- included

and..for about half the price of the other skinny shafts...

Easton ST Carbon Excel Shafts
* Straightness: +/- .003" Guaranteed max
* High-strength, carbon–composite fibers
* Weight tolerance: +/- 2.0 grains
* Black, micro-smooth finish

Size Weight Spine Length RPS
500 7.3 gpi 0.500 30 7/8 9/32
400 8.6 gpi 0.400 31 3/8 9/32
340 9.5 gpi 0.340 31 7/8 9/32
300 10.0 gpi 0.300 32 3/8 9/32

 "H" Nock - Installed; ST RPS Inserts included

Offline Shane C

  • Trad Bowhunter
  • **
  • Posts: 194
Re: Beman CENTERSHOT ??????
« Reply #7 on: January 09, 2013, 11:49:00 PM »
Yeah, I was a little upset when I found out the mfx were being discontinued. My arrows stay full length and I use the 340 spine so I'd lose almost 30grain if I switched to the new Easton traditional. As stated, the Easton Traditional are the direct replacements for the MFX Classics, being the same diameter and everything. The centershot arrows have a wider diameter which I believe is closer to the diameter of the gold tip traditionals.
Wes Wallace Mentor 60" 64@31
Wes Wallace Mentor 64" 50@28
Brush Creek Bows 3-piece longbow 64" 48@28


PBS associate

Offline Longship

  • Trad Bowhunter
  • **
  • Posts: 2
Re: Beman CENTERSHOT ??????
« Reply #8 on: January 10, 2013, 05:09:00 AM »
For me it looks like the new Centershot is similar to the no longer available Easton Epic camo.
If you compare the weight of the Epic (which isn't camoflaged at the back) with the Centershot, it's nearly equal.
However: great looking arrow shaft, if the wood pattern is more wear resistant than the mfx one, and if it's easier to pull than the Gold Tip Trad, this could become my arrow!

Offline olddogrib

  • Trad Bowhunter
  • **
  • Posts: 1365
Re: Beman CENTERSHOT ??????
« Reply #9 on: January 10, 2013, 08:50:00 AM »
The Beman MFX were one of my favorites due to the additional weight.  Looks like another case of Easton erroneously assuming that "wheelie" appeal is trad appeal!
"Wakan Tanka
 Wakan Tanka
 Pilamaya
 Wichoni heh"

Offline Hoyt

  • Trad Bowhunter
  • **
  • Posts: 1413
Re: Beman CENTERSHOT ??????
« Reply #10 on: January 10, 2013, 09:47:00 AM »
That's what I like most about the MFX is the weight. They don't replace MFX's with anything as far as weight goes. You have to change to aluminum/carbon..Full Metal Jackets..or the specialty real heavy arrows to get skinny arrows with the weight of MFX's.

The heavy MFX's spoiled me..when I pick up a regular weight arrow it just feels too fragile and light.

Offline BigJim

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 3320
Re: Beman CENTERSHOT ??????
« Reply #11 on: January 10, 2013, 09:58:00 AM »
The center shots are a nice, good looking arrow and with out the hastle of HIT inserts.

We have them instock and the Easton axis trads are temporarily backordered.

We offer free shipping on all Easton and Beman carbon shafts except Bowhunters and special order.
Thanks, bigjim
http://www.bigjimsbowcompany.com/      
I just try to live my life in a way that would have made my father proud.

Offline Ron Vought

  • Trad Bowhunter
  • **
  • Posts: 426
Re: Beman CENTERSHOT ??????
« Reply #12 on: July 12, 2013, 09:57:00 PM »
Jim -

Just placed another order with you this evening for the Beman Centershots.

Ron

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
Re: Beman CENTERSHOT ??????
« Reply #13 on: July 12, 2013, 10:21:00 PM »
Well, I love the CX heritage shafts for their weight , durability and price BUT I prefer to buy American. I had to try some of these out so maybe I'd find an affordable American version.
I bought a bareshaft today locally to try and tune in and see what I think.
With the standard 75/50 gr insert I decided to go with 400 spine since I want 175gr broadheads. After tuning I'm at 30 1/4" with the supplied 75gr insert and 175grain FP. They are flying great. Total weight is 550gr and these are for my 50# Morningstar.
I think I'm gonna get a 500 spine and use the 50 grain insert and see what I can come up with too. I prefer 9 GPP and its just fun to play with combos. I will be ordering a doz of these Centershots. Very nice arrows
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©