3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: 160 grain?  (Read 459 times)

Offline twospots

  • Trad Bowhunter
  • **
  • Posts: 56
160 grain?
« on: January 06, 2013, 02:56:00 PM »
Didnt know where else to ask this... I have never shot over 125 grain broadheads. I was wondering, as I made a bow that is 42 lbs at my draw weight, Would it be better to shoot a heavier broadhead when hunting. Would I need to lower the arrow weight when i do this or can I just shoot the same arrows? Or are the heavier weighted broadheads made for heavier bow weights? Just asking cause I simply dont know and never really thought about it as I had what works for me. I might not even change what I have, just wondering...

Offline KentuckyTJ

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 8651
Re: 160 grain?
« Reply #1 on: January 06, 2013, 03:27:00 PM »
Sure give it a try. I think your 125 grain heads if you are not using a heavier insert are too light.  A heavier arrow weight will get you more penetration which is even more important with lighter draw weight bows.

Adding the extra weight on the end will definitely change your current arrows performance though and you may have to go up to a stiffer arrow or cut your current arrows shorter a bit if possible.
www.zipperbows.com
The fulfillment of your hunt is determined by the amount of effort you put into it  >>>---->

Offline ddauler

  • Trad Bowhunter
  • **
  • Posts: 551
Re: 160 grain?
« Reply #2 on: January 06, 2013, 04:25:00 PM »
I actually think 125's are fine I killed My first 75 deer with them on POC shafts. Probably 30 were with 50lb selfbow. That said I do believe that 160's are better. I shoot 250 or more on carbons. There are a lot of combo's that work.
Mohawk Sparrowhawk 47# 64"
Ton of selfbows
Traditional Bowhunters of Georgia
PBS Regular Member

"I have been their friend and mortal enemy. I have so loved them that I longed to kill them. But I gave them far more than a fair chance." Will Thompson

Offline Fletcher

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4523
Re: 160 grain?
« Reply #3 on: January 06, 2013, 09:01:00 PM »
160's will work fine from a 42 lb bow.  Going up in point weight to a 160 might have you needing a slightly stiffer (or shorter) shaft but you may do just fine, too.  The easiest thing would be to pick up some 160 gr field points and shoot them.  You are only adding 35 grains to your total arrow weight, it's really not that much.
Good judgement comes from experience.  Experience comes from bad judgement.

"The next best thing to playing and winning is playing and losing."

"An archer doesn't have to be a bowhunter, but a bowhunter should be an archer."

Offline twospots

  • Trad Bowhunter
  • **
  • Posts: 56
Re: 160 grain?
« Reply #4 on: January 09, 2013, 11:02:00 AM »
Thanks guys - 35 grains SOUNDS like a big diference but I guess when your measuring in grains its really not that much. I just know a lot of compound guys that are so crazy over their arrow weights and where the weight is on the arrow that I keep thinking I need to be more precise. Probably makes more dif when your shooting at 70 lbs than 40 and i've never been a speed freak... Course i have had a deer "jump the string" before but that was with a compound bow shooting 280 fps so...

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©