3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Fletch tape on Minwax?  (Read 273 times)

Offline Buranurra

  • Trad Bowhunter
  • **
  • Posts: 106
Fletch tape on Minwax?
« on: February 07, 2013, 07:17:00 PM »
Hi all,

I sent Bohning an email asking about fletch tape on Minwax wipe on poly. this is their response


"I forwarded your questions on to our chemist. She said she has never tried Feather Fletching Tape on Minwax. Typically Minwax makes their stains to gloss coatings for things not to sick to it since it is typically for floors, furniture etc. She wouldn't recommend using Minwax with an arrow and tape. If you would like to try it and it works let us know.
Thank you,
Heather Short
Customer Service
Bohning Company"


Any thoughts on this, has anyone had good or bad results?

Cheers

Jase

Offline Knawbone

  • Trad Bowhunter
  • **
  • Posts: 2483
Re: Fletch tape on Minwax?
« Reply #1 on: February 07, 2013, 07:25:00 PM »
Fletching tape doesn't stick real well on the high gloss, but Iv' had no problems with it sticking to the wipe on satin.I also put a drop of duco cement on each end and the center of the feathers.I found Zinsser ultimate poly works much better.
HHA 5 lam Cheetah 65" 48@26
HHA W Special 66" 52@26
HHA W Special 68" 56@28
GN Bushbow 64" 56@29
21st Street Chinook 64" 58@28
Kota Prarie Nomad 60" 47@24
You can do a lot of things when you have too W S Butler My Grandfather

Online wooddamon1

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4461
Re: Fletch tape on Minwax?
« Reply #2 on: February 07, 2013, 07:29:00 PM »
No problems for me using Minwax wipe-on and tape.
"The history of the bow and arrow is the history of mankind..."-Fred Bear

Offline Dendy Cromer

  • Trad Bowhunter
  • **
  • Posts: 238
Re: Fletch tape on Minwax?
« Reply #3 on: February 07, 2013, 07:58:00 PM »
I use minwax poly and have for years. I also fletch EVERYTHING with fletch tape. I have had no issues at all with compatibility or the tape falling off.... as a matter of fact, if i break an arrow and try to salvage the feathers-- the tape is a booger to pull off. That said, I live in GA. and we don't have exceptionally cold weather- that could be a factor for colder climates.
Southern Zone Rep./Traditional Bowhunters of Georgia

Prov: 3, 5-6

Offline Wolfshead

  • Trad Bowhunter
  • **
  • Posts: 220
Re: Fletch tape on Minwax?
« Reply #4 on: February 07, 2013, 08:02:00 PM »
I use minwax wipe on satin and bohning fletch tape
No problems yet drop of gorilla super glue on each end of the fletch
Bama Expediton Hunter Hybrid Longbow
58", 52# @ 27"
Bama Hunter Longbow
64", 45# @ 27"
"You only need sit still long enough, in some attractive spot in the woods, that all it's inhabitants may exhibit themselves to you by turns"
Henry David Thoreau

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: Fletch tape on Minwax?
« Reply #5 on: February 07, 2013, 08:54:00 PM »
Wipe on gloss and tape in my first couple batches...no issues yet.

Offline Bladepeek

  • Trad Bowhunter
  • **
  • Posts: 3318
Re: Fletch tape on Minwax?
« Reply #6 on: February 07, 2013, 09:31:00 PM »
There may be some confusion between the Minwax stain and the Minwax Poly overcoat. I would guess lots of things would not stick to the stain, but would adhere just fine to the Poly.
60" Bear Super K LH 40#@28
69" Matt Meacham LH 42@28
66" Swift Wing LH 35@28
54" Java Man Elk Heart LH 43@28
62"/58" RER LXR LH 44/40@28

Offline Buranurra

  • Trad Bowhunter
  • **
  • Posts: 106
Re: Fletch tape on Minwax?
« Reply #7 on: February 10, 2013, 04:06:00 AM »
Thanks for the info,

I responded to Bohning's answer and said that if they would like to send me a sample I would give them a report - they responded "no thanks"

Nice LOL

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12245
  • Contributing Member
    • Cavalier Pickups
Re: Fletch tape on Minwax?
« Reply #8 on: February 10, 2013, 06:54:00 AM »
hundreds of woodies wiped with min-wax polyu and feather fletchings adhered with bohning fletch tape.

 
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline Buranurra

  • Trad Bowhunter
  • **
  • Posts: 106
Re: Fletch tape on Minwax?
« Reply #9 on: February 10, 2013, 07:10:00 AM »
Quote
Originally posted by Rob DiStefano:
hundreds of woodies wiped with min-wax polyu and feather fletchings adhered with bohning fletch tape.

 
Wow, those arrows are stunning!!! And thanks for the info.

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12245
  • Contributing Member
    • Cavalier Pickups
Re: Fletch tape on Minwax?
« Reply #10 on: February 10, 2013, 07:20:00 AM »
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline mahantango

  • Trad Bowhunter
  • **
  • Posts: 1384
Re: Fletch tape on Minwax?
« Reply #11 on: February 10, 2013, 08:08:00 AM »
Been using that combo for years, never had a problem. I also add a drop of Duco to the ends for insurance.
We are all here because we are not all there.

Offline BuckeyeGuy

  • Trad Bowhunter
  • **
  • Posts: 344
Re: Fletch tape on Minwax?
« Reply #12 on: February 10, 2013, 08:26:00 AM »
Rob, how much helical on the woodies?  Those look awesome.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©