Question for Zwickey No Mercy users

[SuperK]

I have a question for you folks that use the Zwickey No Mercy broadhead.  Which one do your prefer?  The single bevel, double bevel or 4-blade and why?  I have very limited experience with them but the double bevel No Mercys that I've played with I've been able to sharpen sharper than any other broadhead I've gotten my hands on.  You could literally just touch an arm hair with it and it would be cut.  For me they fly like a field point and penetrate deep in my foam broadhead target.  The 4-blade appears it would have to be one of the best penetrating 4-blades out there due to its length to width ratio.  Like I said, I don't have much experience with them so what have ya'll found out?  Thanks

[Birdbow]

I've had great success with the No Mercy single bevel, making 1 arrow kills on moose, black bear, and deer. I've had them break leg bones, punch through scapulas, and got complete penetration on a bull moose. Indestructable in my experience. Good hunting!

[Pat B.]

Great broadhead ...  Won't go wrong with them !

[RC]

I `ve killed a few critters with the left bevel. They work great. RC

[ChuckC]

You probably need to stick with what is working well for you.  They are really good heads,  all of them.
ChuckC

[joe skipp]

All Zwickey's are good heads. I took 2 deer with the double bevel 2 blade. I shoot the 2 blade Eskimo and Delta also.

[Pat B.]

Joe's a pretty smart fella, listen up !!

[Kamm1004]

the single bevels can be a bit difficult to sharpen but you sound like you won't have problems there. If you can shoot the four blade do it. If not, I like the 2blade single bevels

[Terry Green]

I use no mercy 4 blades on big hogs.....I have a sharpening vid in the how too forum for the main and bleeders.

I use double bevel.

What are you wanting to shoot with them and what is your entire set up...draw weight, length, and arrow weight?

If you can't pass through a deer with a No Mercy 4 blade(unless you hit off shoulder/leg bone) you have issues with your set up or tuning.  Deer are nothing more than a paper bag full of shaving cream and a few tinker toys and one ball joint...and there is NO guarantee you are going to get through the ball joint with ANY head...so stay away from the ball joint.

[SuperK]

Thanks for the input ya'll!

[Shinken]

I have used the right bevel NO MERCY by Zwickey and it cuts the same type of hole as a similar sized right bevel GRIZZLY - when they are both equally sharp!

Good heads all around!

Shoot straight, Shinken

   

[Josh Perdue]

"Deer are nothing more than a paper bag full of shaving cream and a few tinker toys and one ball joint...and there is NO guarantee you are going to get through the ball joint with ANY head...so stay away from the ball joint."

Thats a cool quote.