Arrow help for wife's 54" rer arroyo

[txdiver]

Having trouble with calculators for wife arrows.
All help appreciated-- want carbons from allwoodarrows, 54" RER Arroyo- 40#@ 28" wife draw length 24.75"-need to figure spine and length- for those feeling froogy complete arrow setup. I am lost on a low poundage short bow.Thanks in advance

[ishoot4thrills]

I would say about .600 spine at full length would work. She's probably holding around 33# at her draw.

[Prairie Drifter]

I would suggest CE predator II shafts in .800 spine to start. Probably 27-28" w/ a 145gr point and the half-outsert they have for them. Should be in the ballpark.

[Jake Fr]

Gt 15/35 full length with 150 up front should be close might play with it and trim em down a touch

[txdiver]

Awesome, thanks guys, but now asking about a target arrow setup- same bow same lady--

[heartlandbowyer]

GT 15/35  just mess with tip and length. 75 or 100 gr up front and adjust length till they shoot good the bow should still shoot then pretty flat.

[fz4vgq]

I'm with Prairie Drifter, I really think that bow is going to pull 29#-30# at 24.75" draw length. I know an Arroyo is a fast bow and I think their shelf is cut past center but at 29-30 lbs draw weight I think its gonna need .800 spine  arrows.  I think you could get full length .600's with 150-175grains up front to work but I really think the trajectory is going to be quite arch-y. At 30 lbs draw weight 7-8gpp is plenty.

[IronJohn]

I would also try an 800. You could probably start at a 26" arrow and a 75gr. tip, bet it would be pretty close to flying like a dart. I used the same arrow off a 33# target recurve and draw only 26", right around 28# or so........IJ

[txdiver]

That sounds great I appreciate the input.Prairie Drifters CE predator II shafts in .800 spine. We'll start at 28" cut from there w/ a 145gr point and the half-outsert for  hunting and Iron Johns  26" arrow and a 75gr. tip for target (same outsert Iron John?)Thanks, Who' ya'll like for building 9 each and a dozen axis for myself?