3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: String serving - 3 under ??  (Read 236 times)

Offline Centex

  • Trad Bowhunter
  • **
  • Posts: 250
String serving - 3 under ??
« on: July 19, 2013, 12:44:00 PM »
I shoot 3 under with a 29" draw, and am experiencing separations on my serving underneath the bottom part of my ring finger.  Is this an indication of bad form?  Happens with glove and tab.  60" and 62" R/D longbows. B50 and D10. High anchor and low anchor.  I use a deep hook and my elbow is inline with bow hand.
Howard Hill Halfbreed "Sol" 68" 50@29
Hoyt Buffalo 62" 45@28"

Offline KodiakMag

  • Trad Bowhunter
  • **
  • Posts: 302
Re: String serving - 3 under ??
« Reply #1 on: July 19, 2013, 12:45:00 PM »
How old is the string?
55# Kodiak Mag

"Stay calm, Pick a spot."

Zwickey, the 1911 of Broadheads.
->>>-------->

Offline Centex

  • Trad Bowhunter
  • **
  • Posts: 250
Re: String serving - 3 under ??
« Reply #2 on: July 19, 2013, 12:46:00 PM »
Strings are new.
Howard Hill Halfbreed "Sol" 68" 50@29
Hoyt Buffalo 62" 45@28"

Offline Cryogenic

  • Trad Bowhunter
  • **
  • Posts: 71
Re: String serving - 3 under ??
« Reply #3 on: July 19, 2013, 01:55:00 PM »
That is usually an indication of a loose or incorrect serving.

Offline Centex

  • Trad Bowhunter
  • **
  • Posts: 250
Re: String serving - 3 under ??
« Reply #4 on: July 19, 2013, 02:09:00 PM »
Strings were built by two different experienced string makers. With the 62" longbow I bought string directly from bowyer. The 60" string made by previous bow owner who I shoot with regularly.  His old strings do not wear like the new one.  His servings are still tight and strong.
Howard Hill Halfbreed "Sol" 68" 50@29
Hoyt Buffalo 62" 45@28"

Offline SteveL

  • Trad Bowhunter
  • **
  • Posts: 165
Re: String serving - 3 under ??
« Reply #5 on: July 19, 2013, 05:14:00 PM »
And I thought I only had that problem. Same exact thing happens to me. I make my own strings and at first I thought I served in the wrong direction, but changing that did not make it any better. The odd thing to me is that it doesn't happen when I shoot split finger.

I really haven't come up with a good reason for it, but did notice that it happened quicker when I used more slippery stuff like Halo and found that regular No 4 Nylon serving held up the best.

Offline mountain lion

  • Trad Bowhunter
  • **
  • Posts: 325
Re: String serving - 3 under ??
« Reply #6 on: July 19, 2013, 10:23:00 PM »
I build my own strings and I had the same thing happen when I used halo serving on d-97. I found out that I wasn't getting the begging of my serving tight enough, I was always worried about getting the end good and tight. So I started getting the begging of the serving a little tighter and I haven't had the proem since.
Wild Horse Creek  kestrel 60" 56#@28
Black Widow KB X 58" 51@28"
Black Widow PSA lll 60" 52@28"

" Do not go where the path may lead, go instead where there is no path and leave a trail " Ralph Waldo Emerson

Offline Bob Abeln

  • Trad Bowhunter
  • **
  • Posts: 245
Re: String serving - 3 under ??
« Reply #7 on: July 20, 2013, 07:31:00 AM »
Your serving is not tight enough. I shoot 3 under and never have any problems with loose servings. You have to set the server to be tighter. I want to feel strong tension when i'm serving a string.

Offline SteveL

  • Trad Bowhunter
  • **
  • Posts: 165
Re: String serving - 3 under ??
« Reply #8 on: July 23, 2013, 08:07:00 PM »
Tighter it is then. But I do get confused as to which direction I should serve the thread. I'm a righted shooter and normally hold the bow in my lap with the upper limb to my left and serve left to right. So do I start serving over the top or should I start serving under. Dang this confuses me!

Offline Drewster

  • Trad Bowhunter
  • **
  • Posts: 345
Re: String serving - 3 under ??
« Reply #9 on: July 23, 2013, 10:08:00 PM »
Steve, wrap your serving in the same direction as the string is twisted....simple :-)
Carolina Traditional Archers
North Carolina Bowhunters Association

Offline longstiks

  • Trad Bowhunter
  • **
  • Posts: 425
Re: String serving - 3 under ??
« Reply #10 on: July 24, 2013, 06:34:00 AM »
X2 on what Drewster said. I always twist my brace height more than normal before serving so it makes the string smaller and then untwist to normal brace and my servings don't come loose any more.
Denny

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©