Author Topic: Gold tip 5575 knocks (Read 404 times)

Biggamefish · « **on:** July 30, 2013, 11:12:00 AM »

I have some newer carbons that I have made up. These are the first set of carbons I have ever shot. That being said I was shooting and one of the knocks twisted in my hand while I was inspecting it. I gave it a tug and it came out with ease. Are knock in carbon arrows suppose to do this or do I have to glue them in?? Are all the carbon arrows like this? I ordered these full length with knock on already.

Caughtandhobble · « **Reply #1 on:** July 30, 2013, 11:17:00 AM »

I shoot GT and I swap the factory nocks out for Easton Super nocks. They seem to be tougher and have a snugger fit to me.

BowZen · « **Reply #2 on:** July 30, 2013, 11:21:00 AM »

Just inspect the shaft at the nock end to make sure there are no cracks. Try another nock to see if that makes a difference.

TxAg · « **Reply #3 on:** July 30, 2013, 11:23:00 AM »

Mine will twist or pull out with a little bit of effort. It's never been a problem.

A small dab of super glue will cure it if it bothers you.

« **Reply #4 on:** July 30, 2013, 11:29:00 AM »

I have been shooting GT arrows for years. I use GT nocks and have never had any problems with them. Yes, they can by moved or removed by twisting them. That is a plus to me. as I can move my nock on each arrow to orient the fletching or broadhead just the way I want it. Also being able to remove them easily makes for easy replacement of a damaged nock.

Bisch

Onehair · « **Reply #5 on:** July 30, 2013, 11:31:00 AM »

If they are too loose put a piece of saran wrap over the nock before pushing it in.

VictoryHunter · « **Reply #6 on:** July 30, 2013, 11:38:00 AM »

I shoot GT's as well and have never had any problems. It is strange that it would just come out. Mine move but with a little effort. They are great arrows. I like the fact that they move as well because so I can orient the fletchings and so that if a nock is ever damaged and the shaft is still in working condition, it is easily replaced.

Biggamefish · « **Reply #7 on:** July 30, 2013, 11:56:00 AM »

Thanks guys
I only asked because I am used to alums where you just glue the knock on and you are set. My knocks are staying in the shaft when shooting I was just worried that whey were not suppose to move.

2nocks · « **Reply #8 on:** July 30, 2013, 12:12:00 PM »

I haven't had any issues with GT nocks and you can twist them but should stay put for the most part while shooting. I would NOT glue them in. If they break they will be a pain to remove from the shaft.
The white GT nocks seem more durable and have held up better than the colored ones for me.

Yellow Dog · « **Reply #9 on:** July 30, 2013, 12:55:00 PM »

Quote

Originally posted by BowZen:
Just inspect the shaft at the nock end to make sure there are no cracks. Try another nock to see if that makes a difference.

Good advise.

rraming · « **Reply #10 on:** July 30, 2013, 03:20:00 PM »

some batches are more loose than others - try another batch if you don't like them - I like the GT nock

tzolk · « **Reply #11 on:** July 31, 2013, 08:07:00 AM »

Mine move and come out easily as well, always have. I swap them out with the Easton super nocks as well. The Eastons don't have that abrupt click on the string like the GT's do.

culleng · « **Reply #12 on:** July 31, 2013, 10:18:00 AM »

Quote

I replace mine with easton knocks aslo.

Boomerang · « **Reply #13 on:** July 31, 2013, 11:37:00 AM »

I glue mine in with rubber cement. It keeps them from backing out and if they do break off in the shaft, I screw a wood or drywall screw in them and pull them out with pliers.

tex-archer · « **Reply #14 on:** July 31, 2013, 11:52:00 AM »

I like the fact that I can rotate the nock in the Gold Tip shafts. Saves feather wear on my target arrows.I do however change the nocks. I use to use Easton super uni nocks but I am now using Bohning nocks in my Gold Tips.

yaderehey · « **Reply #15 on:** July 31, 2013, 10:07:00 PM »

I like the Bohning Signature nocks in the Gold Tips also. Hey David, I sure miss that Cherokee Magnum!

Flying Dutchman · « **Reply #16 on:** August 01, 2013, 01:36:00 AM »

Quote

Originally posted by Bisch:
I have been shooting GT arrows for years. I use GT nocks and have never had any problems with them. Yes, they can by moved or removed by twisting them. That is a plus to me. as I can move my nock on each arrow to orient the fletching or broadhead just the way I want it. Also being able to remove them easily makes for easy replacement of a damaged nock.

Bisch

Bisch nailed it!

Atennishu · « **Reply #17 on:** August 01, 2013, 02:07:00 AM »

For loose nocks, the easiest thing to do is place a plastic bag, like the grocery store kind over the arrow and push the nock in and then tear off the bag and trim , makes a good tight fit, but you can still turn them and remove easy.

Fanto · « **Reply #18 on:** August 01, 2013, 04:51:00 AM »

i use the GT nocks or if i want a different colour I buy bohinng signature nocks. they are just as good and cost 1/4

they are push in only ,no glue, work fine no need to change it

58WINTERS · « **Reply #19 on:** August 01, 2013, 11:57:00 PM »

Bohning Signature nocks here.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Gold tip 5575 knocks (Read 404 times)

Users currently browsing this topic: