3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: ? about DMT broadhead sharpner...  (Read 356 times)

Offline MikeW

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 1176
? about DMT broadhead sharpner...
« on: September 03, 2007, 10:56:00 AM »
To start with I'm a big fan of DMT's stones and this looks like a really nice sharpener, especially for the money. It does 2, 3 & 4 blade heads.

A couple questions I have are, Can the stones be changed out?

And from the picture on the web site it looks like the front of the broadhead would never get touched. They look too far apart. I don't know if this is just a bad picture example or what. I can't tell if you can move the stones closer or not?

I just emailed the company and asked them the same 2 questions but I thought I'd ask here and see if there are any users here and what they thought of it.
TIA
 
Time is a great teacher, but unfortunately it kills all its pupils.

Offline Jim Harris

  • Trad Bowhunter
  • **
  • Posts: 236
Re: ? about DMT broadhead sharpner...
« Reply #1 on: September 03, 2007, 12:04:00 PM »
I tried it and did not care for it. Mine has a gap between the stones that I could not get rid of. I prefer to use the DMT Aligner type sharpener for 2 blade heads. This is the type that clamps the blade in place and diamond stone is drawn across it at the angle you pick from several available. It also works great for knives. I got mine from knivesplus.com.
The three blade Wensels I sharpen on the files and DMT stones as shown in the Wensel site. Knivesplus also has a leather stopping block they sell that is great for putting the final edge on a knife or broadhead. It's listed on their site. Jim.

Offline Hot Hap

  • Trad Bowhunter
  • **
  • Posts: 3152
Re: ? about DMT broadhead sharpner...
« Reply #2 on: September 03, 2007, 04:05:00 PM »
Yes it can be adjusted to close the gap. I have one that came with stones and I removed them and put on the diamond style. Works ok for me. Hap

Offline MikeW

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 1176
Re: ? about DMT broadhead sharpner...
« Reply #3 on: September 03, 2007, 05:44:00 PM »
What holds the stones on? It came with stones?
You sure it's a DMT..I don't see them selling stones anywhere only diamond stones.
Time is a great teacher, but unfortunately it kills all its pupils.

Offline bowquiver

  • Trad Bowhunter
  • **
  • Posts: 22
Re: ? about DMT broadhead sharpner...
« Reply #4 on: September 03, 2007, 06:02:00 PM »
If you're sharpening 4 blades the gap is kind of big. If you're doing 2 blades you can close it together to sharpen all the way to the point. The diamond stones are held on with double sided tape. i've had mine close to 10 years, i think.

Offline snoopdawg

  • Trad Bowhunter
  • **
  • Posts: 13
Re: ? about DMT broadhead sharpner...
« Reply #5 on: September 03, 2007, 07:30:00 PM »
http://www.sportsandrectec.com/xblock/default.asp  here is a link to a new sharpening system that uses the same principles as the DMT and TRUANGLES; these systems are both good but hopefully the X-BLOCK system is an improvement. Has anybody tried it yet?

Offline Hot Hap

  • Trad Bowhunter
  • **
  • Posts: 3152
Re: ? about DMT broadhead sharpner...
« Reply #6 on: September 04, 2007, 03:59:00 AM »
I've had mine for at least 15 years and they didn't come with the diamonds then. The stones were put on with glue if I remember right. Hap

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©