Author Topic: Aluminum arrow rec's (Read 432 times)

Wyohab · « **on:** August 23, 2013, 03:08:00 AM »

Can anyone recommend aluminum arrow spec's for a Black Widow SAIII 47#@28 that will be drawn 30in.? I must get a bunch of arrows ordered quickly before departing the US for an extended period. The arrows will be used primarily for stump shooting.

TGbow · « **Reply #1 on:** August 23, 2013, 04:52:00 AM »

I would think 2018 would fly good with full length shaft.

TGbow · « **Reply #2 on:** August 23, 2013, 05:00:00 AM »

If you dont need an arrow as heavy grain weight as a 2018, the 2212 should work.

surething · « **Reply #3 on:** August 23, 2013, 05:35:00 AM »

If you are drawing a true 30" and shooting a d 97 FF string I would go with a 2117, it will also hold up better stump shooting, you may need too play with tip weight a little, I shoot a 46#
@ 28 and draw 29" and shoot a 2018.

r-man · « **Reply #4 on:** August 23, 2013, 08:41:00 AM »

2216. works for me at 31" from 45Lb recurve with 125g heads, I think 2016 would be as good but i wanted the weight.

Edited, was 2219 sorry, I have a head ache

Archie · « **Reply #5 on:** August 23, 2013, 08:52:00 AM »

I'd lean toward the 2117, with 150-175 grains up front. Choose a point weight, and shorten to tune. I have a similar setup.

bigbadjon · « **Reply #6 on:** August 23, 2013, 08:53:00 AM »

You will need something like a 2114, or similar deflection, at full length. Most of the other suggestions will be way too stiff.

Blaino · « **Reply #7 on:** August 23, 2013, 08:59:00 AM »

ron w · « **Reply #8 on:** August 23, 2013, 09:02:00 AM »

2117 I think would be the best choice.

ISP 5353 · « **Reply #9 on:** August 23, 2013, 09:19:00 AM »

I would start with 2117s or 2020s.

David Mitchell · « **Reply #10 on:** August 23, 2013, 10:06:00 AM »

There you go....out of those five listed something ought to work.

Bear Heart · « **Reply #11 on:** August 23, 2013, 10:58:00 AM »

If you are stump shooting why aluminum? Prone to bending. I would say carbon with aluminum footing.

Shawn Leonard · « **Reply #12 on:** August 23, 2013, 06:15:00 PM »

Man, I like the sounds of the 2020 off of that bow experiment with length and point weight. r-man even if your arrows are full length I really think you are over spined my friend! Shawn

r-man · « **Reply #13 on:** August 23, 2013, 06:41:00 PM »

wandering monk · « **Reply #14 on:** August 23, 2013, 08:22:00 PM »

I have used a 2213 in that combo before with great results...

Bear Heart · « **Reply #15 on:** August 23, 2013, 08:53:00 PM »

Quote

Originally posted by Shawn Leonard:
Man, I like the sounds of the 2020 off of that bow experiment with length and point weight. r-man even if your arrows are full length I really think you are over spined my friend! Shawn

2020s are my favorit aluminum shaft for mid range bows. 2219 for heavy.

Wyohab · « **Reply #16 on:** August 27, 2013, 10:08:00 AM »

Thanks for all the input

STEVE R. · « **Reply #17 on:** August 27, 2013, 01:16:00 PM »

I have close to the same rig. You should try 2117 31" long and put a 160 or 145 head. I tried all of the other shafts listed and found the 2117 the ticket.

MikeM · « **Reply #18 on:** August 27, 2013, 01:33:00 PM »

I shoot a widow pmax 46#@30 with 30.5" shafts. Widow recommended 2216 for my set up. I can shoot both 2020 with 125 points cut 30.5 BOP and 2216 with 145 points cut 30.5. Since you would be pulling over 50# with your set up I think 2020, 2117, and 2216 would be more in line with your needs depending upon point weight and BOP length of arrows.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Aluminum arrow rec's (Read 432 times)

Users currently browsing this topic: