How to remove tape goop?

[fisherick]

I have a one piece bow that has snakeskin limb sensation covering. During turkey season I installed cloth camo tape over the limbs. What's the best way to remove the tape goop without destroying the snakeskin covering?

[olddogrib]

Goo Gone (WallyWorld)should get rid of residue, but I don't know what it will do to the covering.

[flinthead]

Try the same acetone we use to clean arrows before fletching. Roy

[jackdaw]

WD-40

[Knawbone]

2x on the acetone

[Lamey]

Be REALLY cautious with Acetone... It can affect certain finishes in a bad, bad way.

Some of the safer alternatives are Goo Gone, Goof off etc.  they are generally much less aggressive but do the job well.

On stuff like tape residue, I would whipe some on liberally,  leave it sit for a few minutes, then wipe off... repeat as necessary.

[reddogge]

+2 on Goof Off.

[rainman]

WD-40

[WRV]

WD-40x2

[Hud]

Tape residue is a result of the tape curing. I would proceed carefully by trying a small amount on a rag in one small, small area. Don't saturate the rag. Here are some products that might work, although no guarantee. White Vinegar, Mineral Spirits, Finger nail polish remover with acetone; Goof Off. Start with the first.  It may take a few minutes. Work in one direction with the scales.  

[nick straatmann]

If you dont have any luck with those, which all work great. Ronsonol zippo lighter fluid works to

[TC in Spfld]

Stay away from the acetone!!!!!  WD40 might not work the fastest, but it won't hurt any finish.

[S. Brant Osborn]

Try olive oil on a soft rag.  Be liberal with it and give it a rub.

[Cookus]

Goof Off is awesome stuff and readily available at the local chain lumber store.   Whatever you use, test it first!!!