Author Topic: Insert help please !! (Read 294 times)

rambo1993 · « **on:** November 24, 2013, 11:02:00 PM »

Hey guys I'm tapping my Kota for a kwikee kwiver and want to know what the 100% best glue out there is to glue the inserts in for better holding

katman · « **Reply #1 on:** November 25, 2013, 06:33:00 AM »

I would think a slow cure epoxy would be very strong. Remember to degrease/clean the metal.

rambo1993 · « **Reply #2 on:** November 25, 2013, 09:13:00 AM »

Thank you katman any epoxy you guys would suggest ?

**DONOTDELETE** · « **Reply #3 on:** November 25, 2013, 09:56:00 AM »

Yup... Epoxy is good. Use acetone on the metal like Katman recommended. Some types of mineral spirits, or paint thinner have oil in them.

rambo1993 · « **Reply #4 on:** November 25, 2013, 01:43:00 PM »

Thank you katman any epoxy you guys would suggest ?

Jon Stewart · « **Reply #5 on:** November 25, 2013, 06:12:00 PM »

any name brand slow set epoxy will work. You can sand the inserts a little also.

Fletcher · « **Reply #6 on:** November 25, 2013, 06:31:00 PM »

Devcon

Mr.Magoo · « **Reply #7 on:** November 25, 2013, 06:34:00 PM »

I've used JB Weld, but I think it's brittle. I like Z-Poxy and 3M's 5200 is awesome stuff too (5200 takes a week to cure fully though).

Looper · « **Reply #8 on:** November 25, 2013, 11:16:00 PM »

I use the stuff used by golf club builders to secure a head to a shaft. It's very shock resistant.

News:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS