3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Back quiver  (Read 304 times)

Offline Rabbit Stew

  • Trad Bowhunter
  • **
  • Posts: 36
Back quiver
« on: September 20, 2007, 06:00:00 PM »
Alright well recently i picked up a relly nice 50$ back quiver at the store but ive come across a problem. I plan on using this for hunting but heres no way for my arrows to stay put in the quiver. I don't want two broadhead tipped arrows rattling around cutting each other and falling out posing a danger. Anyone have an suggestions to fix this problem? Also its just a tube quiver no individual arrow slots or anything
Hunt Find Shoot Kill Clean Cook Eat Crap Repeat

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: Back quiver
« Reply #1 on: September 20, 2007, 06:04:00 PM »
ok  i just put hard foam in the bottom or a bit of rag it stops the arrows from cutting the quiver and they stay put. no problem  :thumbsup:    :campfire:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline woodchucker

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5427
Re: Back quiver
« Reply #2 on: September 20, 2007, 06:11:00 PM »
I don't understand what the problem is..... Could you please be more specific?????

I've used the same backquiver for hunting for many years now without any problems. I backquiver is just a big leather tube that holds arrows.....The "secret" to it holding the arrows securely,is that the quiver should "flatten" in the middle,to prevent your arrows from rattling around or falling out.

I can put on my backquiver,load it with 6-12 arrows,then bend over and pick up a quarter off the floor without any of them falling out.
I only shoot WOOD arrows... My kid makes them, fast as I can break them!

There is a fine line between Hunting, & Sitting there looking Stupid...

May The Great Spirit Guide Your Arrows..... Happy Hunting!!!

Offline Minuteman

  • Trad Bowhunter
  • **
  • Posts: 282
Re: Back quiver
« Reply #3 on: September 20, 2007, 06:12:00 PM »
Good back quivers should be soft enough and worn tight enough that the arrows won't spill out when you bend over to tie your shoes or retrieve a shot arrow from the ground.
  If yer worried about the BH's cutting where they shouldn't you may need some BH booties for on the end of yer arras. I just stick a stiff piece of packing foam ( not styrofoam) in the bottom and let 'em jab into that.
There sure is alot of air around a squirrel...eeyup.

Offline Minuteman

  • Trad Bowhunter
  • **
  • Posts: 282
Re: Back quiver
« Reply #4 on: September 20, 2007, 06:14:00 PM »
Hey great minds think alike I guess. :)
There sure is alot of air around a squirrel...eeyup.

Offline Rabbit Stew

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Back quiver
« Reply #5 on: September 21, 2007, 03:12:00 PM »
Alright guys i fixed the problem just stuck some foam in the bottem then i took some christmas wrapper tubes and put them in for individulaarrow slots
Hunt Find Shoot Kill Clean Cook Eat Crap Repeat

Offline mcgroundstalker

  • Trad Bowhunter
  • **
  • Posts: 3304
Re: Back quiver
« Reply #6 on: September 21, 2007, 04:20:00 PM »
Hey Chuck! I didn't think you could bend that far. But, for a quarter you would do almost anything...  ;)  ...

... mike ...  :D
"Be faithful in small things because it is in them that your strength lies"

Offline woodchucker

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5427
Re: Back quiver
« Reply #7 on: September 21, 2007, 09:19:00 PM »
WELL!!!!! At least I have to BEND OVER to touch the ground my little "knuckle dragging midget" Friend!!!!!   :bigsmyl:

How The Heck Are You Mike?????!!!!!
I only shoot WOOD arrows... My kid makes them, fast as I can break them!

There is a fine line between Hunting, & Sitting there looking Stupid...

May The Great Spirit Guide Your Arrows..... Happy Hunting!!!

Offline carbonarrow

  • Trad Bowhunter
  • **
  • Posts: 45
Re: Back quiver
« Reply #8 on: September 21, 2007, 09:23:00 PM »
I have one of 3 rivers broadhead caddy. That works good.
MT 11:28
Come to me all you who labor and are burdened, and I will give you rest.

Offline PrarrieDog

  • Trad Bowhunter
  • **
  • Posts: 681
Re: Back quiver
« Reply #9 on: September 21, 2007, 09:44:00 PM »
If you put cardboard tubes in the quiver, you defeat the back quiver's ability to "grasp" the arrows and keep them quiet and from falling out. At least that is how I use mine.
Prarrie Dog

Offline Archer Fanatic

  • Trad Bowhunter
  • **
  • Posts: 196
Re: Back quiver
« Reply #10 on: September 21, 2007, 10:05:00 PM »
Put half a bow of oat meal in the bottom of your quiver.  It works for me.

Offline donw

  • Trad Bowhunter
  • **
  • Posts: 222
Re: Back quiver
« Reply #11 on: September 23, 2007, 01:02:00 PM »
use some native tree limbs stuffed into the 'tube' with leaves intact.

holds aeroz securely and aids in masking odors, too.
i was told by a sales person, when purchasing an out-of-date newpaper that it was out-of-date...

i told her "i've been told i'm out-of-date, too"...

does that mean i'm up-to-date?

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©