Author Topic: 21/64 ? (Read 230 times)

Sam McMichael · « **on:** April 29, 2014, 10:50:00 PM »

Is 21/64 a standard shaft diameter? I have never heard of it but recently bought some shafts marked in that diameter. Are field points available? I am familiar with 23/64, but this size is new to me.

dhermon85 · « **Reply #1 on:** April 29, 2014, 10:55:00 PM »

I ran across this a while back and have seen several Bear arrows advertised in that size. Don't know about point availability though...

JimB · « **Reply #2 on:** April 30, 2014, 12:02:00 AM »

11/32" points will work fine.

Terry Lightle · « **Reply #3 on:** April 30, 2014, 06:13:00 AM »

We have some 21/64 nocks and a few 21/64 points

hvyhitter · « **Reply #4 on:** April 30, 2014, 05:29:00 PM »

5/16 is 1/64 smaller and 11/32 is 1/64 larger, use eiter one and dont worry about it. Not building NASA rockets here, just arrows. 21/64 size nocks and points are for aluminun arrow sizes 2117,2115,2114,2113,2112................

Orion · « **Reply #5 on:** April 30, 2014, 08:21:00 PM »

21/64 shafts were made in the 40s and 50s, maybe later as well, but haven't been made recently. As has already been pointed out 5/16 and 11/32 components will work just fine.

Sam McMichael · « **Reply #6 on:** April 30, 2014, 08:44:00 PM »

Thanks! I've got plenty of 11/32 points on hand. Nocks don't matter, as I'm going to try to do self nocks to shoot off my English longbow.

News:

Author Topic: 21/64 ? (Read 230 times)

Sam McMichael

21/64 ?

dhermon85

Re: 21/64 ?

JimB

Re: 21/64 ?

Terry Lightle

Re: 21/64 ?

hvyhitter

Re: 21/64 ?

Orion

Re: 21/64 ?

Sam McMichael

Re: 21/64 ?

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS