3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Martin Sliver  (Read 409 times)

Offline Doods70

  • Trad Bowhunter
  • **
  • Posts: 96
Martin Sliver
« on: August 20, 2014, 06:30:00 AM »
Please enlighten me regarding this bow. I saw it on you tube as one of Martin's new 2014 line up. The representative says its 20# at 20 inches but stacks to nearly 40# at 29 inches.

I looked it up here at our dealer and it was so small and petite. Will it really be able to draw that much? My draw is 28 and I really liked the bow, just not sure if it will explode on me. Anyone here have a review or have used one?

Thank you

Online joe vt

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1179
Re: Martin Sliver
« Reply #1 on: August 20, 2014, 07:17:00 AM »
I believe it's a 54" longbow. I really doubt it will demonstrate good shooting qualities for you at your 28" draw length. This longbow was designed for youths with shorter draw lengths and I imagine the riser grip will be small too.
~ joe vt  >>>~~~~~~~~>

TGMM Family of the Bow

Offline nineworlds9

  • Trad Bowhunter
  • **
  • Posts: 4605
  • Northman
Re: Martin Sliver
« Reply #2 on: August 20, 2014, 07:57:00 AM »
Stacking is not the same as efficient energy storage.  Pretty safe to say this bow will not have the same cast/power of a bow built from the beginning as a 40@28 bow.  This could be confirmed by scaling it.  If at any point in the last part of the draw it is pulling more than 2.5-3#/ inch it will be a dog.  This is a youth bow.  I would skip it.
52" Texas Recurve
58" Two Tracks Ogemaw
60" Toelke Chinook
62" Tall Tines Stickflinger
64" Big Jim Mountain Monarch
64" Poison Dart LB
66" Wes Wallace Royal
            
Horse Creek TAC, GA
TBOF

Offline Doods70

  • Trad Bowhunter
  • **
  • Posts: 96
Re: Martin Sliver
« Reply #3 on: August 20, 2014, 08:51:00 AM »
Thank you for your responses. Will skip this one and thanks

Doods

Offline SCS

  • Trad Bowhunter
  • **
  • Posts: 53
Re: Martin Sliver
« Reply #4 on: August 20, 2014, 09:03:00 AM »
I've been looking at this one as well. My draw is only 25" and would love to try a short "longbow". Looking at it on Martin's website, it shows it in low draw weights. Under their "Buy Here" link, it shows heavier weights. I need to e-mail them to find out which is right.

Steve

Offline bamboo

  • Trad Bowhunter
  • **
  • Posts: 1161
Re: Martin Sliver
« Reply #5 on: August 20, 2014, 09:36:00 AM »
that's only 2.2# per inch for the last 9"--
 maybe not the best way to get to 40# but-not brutal either
Mike

Offline nineworlds9

  • Trad Bowhunter
  • **
  • Posts: 4605
  • Northman
Re: Martin Sliver
« Reply #6 on: August 20, 2014, 12:24:00 PM »
Yeah I'm pretty certain its not building 2.2#/inch over 9"...I bet its hitting a good 4#/ inch in the last couple inches.  With the profile this 54" bow has I'm pretty sure you'd be stressing the crap outta those limbs.
52" Texas Recurve
58" Two Tracks Ogemaw
60" Toelke Chinook
62" Tall Tines Stickflinger
64" Big Jim Mountain Monarch
64" Poison Dart LB
66" Wes Wallace Royal
            
Horse Creek TAC, GA
TBOF

Offline bisket

  • Trad Bowhunter
  • **
  • Posts: 154
Re: Martin Sliver
« Reply #7 on: August 20, 2014, 01:43:00 PM »
I just bought one for my 8 year old son. He draws 22" and it shoots a good arrow and is quiet. It is a very thin limbed bow with a small grip and riser. I would not even think about pulling it 28". I think it will give him 2-3 more years before he outgrows it. I would call it a kids bow.
Michigan Longbow Association
Michigan Traditional Bowhunters

Many men go fishing all of their lives without knowing that it is not fish they are after.
-Henry David Thoreau

Offline Doods70

  • Trad Bowhunter
  • **
  • Posts: 96
Re: Martin Sliver
« Reply #8 on: August 20, 2014, 04:01:00 PM »
Thanks again for the insights. Since you all have great info, what do you think of the Martin Independence.

Trying to get my hands on a good trad bow but some are really expensive.

Offline meatCKR

  • Trad Bowhunter
  • **
  • Posts: 279
Re: Martin Sliver
« Reply #9 on: August 20, 2014, 06:51:00 PM »
Check out maddog bows.  Mike can build you a short bow and at a great price.
"Leave it as it is. You can not improve on it. The ages have been
at work on it, and man can only mar it."
- Theodore Roosevelt upon seeing the Grand Canyon.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©