15 grns enough to worry about?

[Caleb the bow breaker]

All,

Hopefully a softball for you guys.  Is a 15 grain difference between broadhead and field point enough to worry about when it comes to accuracy and spine.  

Specifically would a 200 gr fieldpoint be that different than a 215 gr broadhead?  if so where do I get a 215 gr screw in fieldpoint???

C

[Charlie3]

Insignificant difference if any at all. My field points are 200 grains and my broadheads 235 due to glue-in adapter, both fly well.

Never a bad idea to shoot it and make sure for yourself though.

[drewsbow]

no

[Cavscout9753]

I'd say no way unless your on the border on one end or the other. If you're in the target area of the right weight it shouldnt be noticable. Heck I probably vary 15 grains in hot melt from tip to tip haha (not really, just kidding).

[daveycrockett]

Nope. Shoot 'em!      

[katman]

Shouldn't, but if you want you can get 5gr brass washers from 3 rivers to put behind field point.
 http://www.3riversarchery.com/Brass+Weight+Washers_i5208X_baseitem.html

[Austin Brown]

Probably not, especially with carbon arrows.  I did find however that 20 grains is pretty noticeable to me bareshafting aluminum. This the first year I really have done extensive bare shafting.  I really was surprised how much switching from 125 to 145gr points moved point of impact on aluminum.

[Terry Green]

Like stated above....not unless you are borderline on spine.

[ISP 5353]

Probably just fine, but shoot them and see what they do for you!

[stevem]

Probably no, again esp. if you are using carbon.

[Friend]

Let the BH's speak for themselves.

[Caleb the bow breaker]

okay thanks all.  Just looking to order some heads and didnt want to buy them if it was likely i would have to change my entire set up. I am shooting carbons and think i have plenty of spine to mess with.

C