Add an inch to POC.

[capt eddie]

Is there an easy way to add one inch to the length of a POC shaft.  I have plenty of shafts that I cut and tapered.  But now that I have learn to use back tension.  My draw has lengthen one inch and I can not use the shafts as they are.  I have thought of adding an aluminum footing to get the length that I need. Plus be able to increase the spine of the shafts.  I have tried using the aluminum adapters on the taper.  This only weakens the spine with the addition of the 50 grs. How anyone heard of an inch long nock?

[macbow]

There is a wooden extension on the market. I have a few somewhere.

[macbow]

It is called Reparrow.
Has inside taper to match the normal taper on existing arrow. Just glue them on and make sure they are straight.

[Zradix]

Macbow has your answer.

They work very well....much much better product than I expected.

[swampthing]

Or just use them as blunts for stumping.

[steadman]

You can also learn to put a hardwood footing on. A 2 foot splice is fairly simple, you can add a couple inches this way.

[dragonheart]

Woody weights will add to the length of the arrow shaft.

[WESTBROOK]

Reparrow footings.