yes.
Due to my stand being a leverage and not a square tubing like a LW, I had to use a little longer bolts. The only thing that will vary is the length of the bolt.
1 - grade 8 bolt 1/4" by 2.5" long. (this will vary according to which sticks you have)
2 - 1/4" washers
1 - 1/4 fender washer (wide one)
1 - 1/4" husky socky(supposed to use a 1/8" by 3/4" galvanized pipe coupling, but I couldn't find any at a local store.)
1 - 1/4" nylon lock nut.
Put them on in this order(what i did).
1/4 washer, fender washer, sock, stand, 1/4 washer, lock nut. VERY EASY and VERY CHEAP!!
most expensive part was the 1/4 washers which were under $2/ socket.
Not that it matters, but I put the socket head(fattest part) towards the top of the bolt. I figured that having the smaller part of the socket towards the stand would give it less "play room" than having the working end towards the stand.
I plan on doing this to every stand I get from here on out. Now I'm just waiting on some rope to come in the mail.