3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: anyone ever use AMSTEEL 3/16" rope?  (Read 698 times)

Offline DanielB89

  • Trad Bowhunter
  • **
  • Posts: 2824
anyone ever use AMSTEEL 3/16" rope?
« on: December 16, 2014, 12:22:00 PM »
I am debating on changing out the rope on my climbing sticks to something skinnier.  I currently have 3/8" rope and find that it can be a little stiff.  I found some 3/16" AMSTEEL for a good price and was wondering how hard it would be to untie if I put 2 half hitches in it and then stepped on it to climb the tree(i weight 220lbs).
"Blessed is the man who trusts in the LORD And whose trust is the LORD. Jeremiah 17:7

"There is a way which seems right to a man,
But its end is the way of death."  Proverbs 14:12

Offline LB_hntr

  • Trad Bowhunter
  • **
  • Posts: 1153
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #1 on: December 16, 2014, 12:37:00 PM »
I would think it would work great. Its winch line and rated very high. I use similar warn winch synthetic line on my atv winch and use it all the time. very strong durable stuff.

Offline Nala

  • Trad Bowhunter
  • **
  • Posts: 1052
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #2 on: December 16, 2014, 12:54:00 PM »
It certainly won't break, you won't have to worry about that at all.

If that's what you are going to use it for, I'd say it would be fine.

Nalajr

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #3 on: December 16, 2014, 05:22:00 PM »
Sounds good to me.

Offline hickstick

  • Trad Bowhunter
  • **
  • Posts: 786
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #4 on: December 16, 2014, 05:59:00 PM »
I just put 1/4" amsteel blue on my leverage sticks.  but havent use them in the field yet.  my back yard trial run worked fine.
Diagonally parked in a parallel universe.

Offline ziggy

  • Trad Bowhunter
  • **
  • Posts: 49
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #5 on: December 16, 2014, 09:45:00 PM »
I've used it for about 5 years now.  I don't use a typical knot but the system I use does give me some trouble if the steps are left on for a long period.  By trouble I mean I have to take my gloves off and use my finger nails to pick at it a while before it comes loose.  If it is the same day as they were tied on, or its only been a week or two I don't have a problem.

Offline bamboo

  • Trad Bowhunter
  • **
  • Posts: 1161
Mike

Offline DaveT1963

  • Trad Bowhunter
  • **
  • Posts: 893
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #7 on: December 17, 2014, 08:53:00 AM »
I like the 1/4 inch as it easier to work the half hitches out for me and I like the added mass as I believe it holds better when cinched under the versa button on my climbing sticks.  Just my personal preference as I know 3/16 is strong enough and should work fine.
Everything has a price - the more we accept, the more the cost

Caribow Tuktu ET 53# @ 27 Inches
Thunderhorn takedown longbow 55# @ 27
Lots of James Berry Bows

Offline DanielB89

  • Trad Bowhunter
  • **
  • Posts: 2824
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #8 on: December 17, 2014, 09:08:00 AM »
I know that the rope is strong enough.  I was wondering about how easy the 1/2 hitches would be to take out after stepping up on the step and them getting cinched down.
"Blessed is the man who trusts in the LORD And whose trust is the LORD. Jeremiah 17:7

"There is a way which seems right to a man,
But its end is the way of death."  Proverbs 14:12

Offline Mark Normand

  • Trad Bowhunter
  • **
  • Posts: 234
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #9 on: December 17, 2014, 04:49:00 PM »
I use rope from the "EZY® Climb Folding Rope Tree Step".  It's flat type, wraps well, and not bulky. Someone here or elsewhere mentioned they were able to buy a set of rope only from the EZY company for their own sticks.  Has a loop on the end, no knots needed.
Stalker ILF recurve
Dakota II longbow

Offline calgarychef

  • Trad Bowhunter
  • **
  • Posts: 1196
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #10 on: December 21, 2014, 12:09:00 PM »
If you use a stoppered slippery half hitch, they are easy to untie.  Like tying the loop in your shoes hiking of then put a stick through the loop and pull it tight.  If you look at a daisy chain you'll understand what I'm talking about.  I use this knot all the time in all kinds of circumstances.

Offline goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #11 on: December 21, 2014, 03:34:00 PM »
Quote
Originally posted by bamboo:
 http://www.rei.com/product/716225/pmi-accessory-cord-6mm#tab-specs  

.36 a foot
rei is a major supporter of the humane society
humane society is a major proponent of anti-hunting

Offline goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: anyone ever use AMSTEEL 3/16" rope?
« Reply #12 on: December 21, 2014, 03:37:00 PM »
check out some hammock forums. those guys use amsteel on just about everything. you may find some better knots to use

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©