WhatDo You Think About This Head

[dbd870]

I've been messing around with 100gr field tips (vs 125) with my Grizzly and found my arrows are flying even better, just perfect. I'm using 1916's and pulling 46#. I have some 100gr Muzzy MX3's; what do you think about using them on deer this fall?    

[ron w]

Keep your shots close and put it in the right place, you'll be fine. Muzzy and Thunderheads 3 blades have killed a ton of deer.

[Wannabe1]

It is a broadhead that has to punch a hole before the blades start to do the cutting. I would go with a cut on contact head over that one. Just my $.02.

I was doing a search last night on 100gr heads and Simmons has a Landshark that is 100gr and they are killer heads. All pun intended!   :D

[A.S.]

I have killed several deer using a 1916 tipped with a Thunderhead 85. Just hit 'em in the right spot.

[Wannabe1]

While I was throwing around my $.02, I really don't have any experience with that type of head. Just going off of some things I read.

Allen, was your penetration pretty decent with that Thunderhead?

[A.S.]

Arrow was sticking in the dirt on most of them.

[pdk25]

Probably killed around 40 deer with muzzy 3 blades in my compound days.  I feel there are much better options available for use with a stickbow, particularly if it a little on the low energy side.  I shoot heavy enough setups that I am sure those heads would work fine on deer.  Still prefer other heads.  Good luck to you.

[Wannabe1]

Arrow was sticking in the dirt on most of them.

If funds are an issue, I definitely believe in using what you got. I am going to give this one in the green a try this year based on some results I've read about. Good luck with whatever you choose.

 

[dbd870]

Buying new heads is not a problem, but I used them with good results out of the wheel bow and since I already had them I wondered how they would do. My concern is adequate penetration. If I'd be better off with a 2 blade like a few that have been mentioned already then I would go that direction

[A.S.]

I shoot mostly cut in contact 3 blades now, but the others worked just fine "back in the day".

[Stone Knife]

If they have the trocar tip they will work.

[ChuckC]

wannabe. . .  just wondering, are those heads made in China ?  I see stuff like that on **** all the time.

[Wannabe1]

I believe they are made right here in the good ole USofA. The company is out of MO. and the guy that owns it developed the head. PM'd you a link to their website.

[dbd870]

Originally posted by Stone Knife:
If they have the trocar tip they will work.

They do

[Kopper1013]

I used muzzy for 11yrs and killed many deer with them but that was on a wheel bow. I love  muzzy's but switched to a single bevel cut on contact head when I went traditional. I think muzzy a have a lot going for them when they have all that fps behind them just don't feel they are probably the perfect fit for our traditional bow's.

[hunt it]

Consider the muzzy phantom, one of the best screw on heads around.

[Tim Finley]

My nephew shot a buck at xmas time and used a muzzy . I tried to tell him otherwise as he had only a 48# d bow and a light carbon arrow but he's stubborn . He came back the second night with a little 4x4 and had got a pass through . Ha he showed me .