3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Arrow Identification Help  (Read 433 times)

Offline tracker12

  • Trad Bowhunter
  • **
  • Posts: 1796
Arrow Identification Help
« on: May 18, 2015, 08:20:00 PM »
I found an arrow over the weekend that flat out shoots bullet holes out of my #43 RER LX Longbow.  The arrow is an Easton XX75 Blues 29" with a 125 grain head.  I'm just not sure what size it is.  The outside diameter is .281.  I measured an XX75 1916 and it is right at about .3.  So does that make the Blues I found a 1816.  I found the Blues online and that seem to come in 1716, 1816 and 1916.
T ZZZZ

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: Arrow Identification Help
« Reply #1 on: May 18, 2015, 08:38:00 PM »
Sounds right to me.  Shouldn't be to hard to find another to confirm.

Offline ChuckC

  • Trad Bowhunter
  • **
  • Posts: 6775
Re: Arrow Identification Help
« Reply #2 on: May 18, 2015, 10:08:00 PM »
Doesn't it say what it is on the shaft ?  Look below the "Blues" logo ( spin the shaft around)
.281 is 18/64


ChuckC

Offline creekwood

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 831
Re: Arrow Identification Help
« Reply #3 on: May 18, 2015, 11:22:00 PM »
A 1816 arrow shaft is 18/64 in diameter and the wall is .016 inches thick. etc...

Offline tracker12

  • Trad Bowhunter
  • **
  • Posts: 1796
Re: Arrow Identification Help
« Reply #4 on: May 19, 2015, 06:54:00 AM »
Thanks guys for the info.  Marking must be worn off I was unable to locate the size.
T ZZZZ

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©