BW PCH Curious on what carbon shaft you would choose

[Tedd]

What gold tip trad carbon spine and front weight would you be using with a Black Widow PCH 57@31.  (drawn to 30.5"-31")

Thanks,

[Wheels2]

Go on to the 3rivers site and use their Dynamic Spine Calculator.  Fill in your bow info and adjust arrow length and points to find a match.  
Real good place to start.  Leave the shafts a bit long and glue insets with the cool stick from Ferr-l-tite so you can remove them to trim the shafts to fine tune bare shafts.

[Tedd]

been there with that chart. the recommended is too stiff.

[AZ_Longbow]

Cut from the back when you bareshaft. Are you trying for a 10gr pp?

[KSdan]

Tedd- I shoot a 62" SA with those same specs (55@31).  1) Like me, you will not have much variable in cutting them down. 2) I wanted to shoot 200-250 up front giving me a decent f.o.c. 3) My conflict came as I got "caught" between GT 5575 (.400) and 7595 (.300). 4) I was forced to go with CE Heritage 350s(.320) [and 250s are .375].  The .320 solved the "caught between."

I have had a sweet shooting arrow (bare shafts easily out to 30 yds!) with Heritage 350s @ 32 bop.  I use a 100gr insert with a 160gr head (260gr up front).  That makes a 670 grain arrow.  

I really feel it is even flat shooting with point on at about 35 yds.

Hope that can help some
Dan in KS

[Tedd]

Thanks Dan, That is exact where I'm at.  Between spines. Almost got it perfect with .340s but my arrow is getting a little heavy with all the front weight. 400s seem like that would be way too weak but I ordered some.
Tedd

[KSdan]

If .340 spine is too stiff you may need to try those Heritage 250s which are .375 spine.

[kat]

I am shooting the Heritage 250s out of my PCH with 260 up front, and they fly well with 51#@30". I would think you would need to go to the Heritage 350s.

[Biathlonman]

I was thinking .340 or I recently discovered that some of the cheaper victory arrows come in 350.  Heritage at .380 could work.  Or call up surewood and grab some 85-90

[STICKBENDER98]

I'm shooting 3555s out of my PCH, mine is 51# @ 28".  I draw 27", my shafts are cut to 28 1/2" with 225 grains up front and have great flight. I can also shoot the same set up with 5575s. Also my bow is 60", I prefer the 3555s as they seem a little quicker to me, not sure why, because my overall arrow weight is pretty much the same between both size shafts.