Arrow Question?

[9 Shocks]

Just got around to starting the tuning process on my new toelke whip.

Its 58"s and 46@27.  I draw almost 27" maybe a hair less.

Brace height at 7"

Anyways.  I have some 1535's full length with 50 grain inserts installed that I plan on shooting out of the bow. finished length and point weight to be determined.

Does anyone else shoot a similar set up?

I am going to bareshaft tune my arrows and everything.  Just looking for options as far as similar set ups and what works for everyone.

I have so many arrow materials and shafts laying around to try.  Just seeing what has worked.

Thanks

[damascusdave]

You have not actually started the tuning process until you shoot some arrows...the bareshafting process will tell you what works...sometimes I hit it right away, sometimes I need to try quite a few options...for me the string, the variable so many people leave out when telling us what they are shooting, is the biggest single factor in determining dynamic spine

DDave

[9 Shocks]

Ok.  Full length bare shafts with 200 grains up front are flying tail left but hitting where im looking.  Going to fletch up a few and see where they impact.

[stonewall]

I shoot a 45# at 26 maddog Prairie Predator with 600 gold tips cut to 28" with 100gr. insert and 150gr. head. The 600 is the same as 15/35

[Bud B.]

try 145 and 175gr points as well.

[Bud B.]

scratch that...if you're including 50gr insert weight, try 125gr points. You might want to even try 100gr points.