3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Suggestions for a Release.....  (Read 842 times)

Offline Nala

  • Trad Bowhunter
  • **
  • Posts: 1052
Suggestions for a Release.....
« on: January 22, 2016, 01:12:00 PM »
Hey all,

I'd like to try a release for a bit.  I am trying to build back up and it's going slower than I hoped.  I have to frequently take breaks because of the pain in my joints from a condition I have that is permanent.  I think the temporary use of a release will help me to shoot more as opposed to hardy shooting at all or just shooting  few arrows a day.

I have one of the WINN Glove Trigger releases that I've owned for many years.  I got it when I bought my compound and just kept it when I sold it.  It works pretty well, but I'd like to try some others that are used by TRAD shooters.

I've seen a few that look interesting like the one made with a deer antler and a hook.  I know there are lots more out there though.

Can you all post some info about releases that you have used or have seen or heard about over the years?  I'd like to find one that would work well for me.

Please post pics if you can....

Thanks for your time and any help you can give me.

Nalajr

Offline wingnut

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 6179
Re: Suggestions for a Release.....
« Reply #1 on: January 22, 2016, 01:28:00 PM »
Actually releases have been around in the trad world for more then 50 years.  The deciding point is going to be the center shot of your bow as the release does not induce paradox in your arrow and the arrow is going to come out straighter then with fingers.

Give the one you have a go.  If you need help give me a call.

Where is Spring Area?

Mike
Mike Westvang

Offline tomsm44

  • Trad Bowhunter
  • **
  • Posts: 1340
Re: Suggestions for a Release.....
« Reply #2 on: January 22, 2016, 03:01:00 PM »
This was recently posted on here.  Might interest you.

 http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=148192
Matt Toms

Flatwoods Custom R/D:  64", 47@28
'66 Kodiak: 60", 55@28
Redwing Hunter:  58", 53@28
Ben Pearson 709 Hunter:  58", 47@28
Ben Pearson 709 Hunter:  58", 42@28
Hoots Recurve:  56", 42@28

Offline Nala

  • Trad Bowhunter
  • **
  • Posts: 1052
Re: Suggestions for a Release.....
« Reply #3 on: January 22, 2016, 05:45:00 PM »
Hey all,

I am in Spring....about 20 minutes north of Houston.  I'm right below the Woodlands.

I will use mine a bit, but I have found that my arrows fly different when I use this release.  I anchor to the same point, but when I release I get porpoising from my arrows that I don't get when I shoot with my tab or glove.
I guess it doesn't matter how the arrows look when they fly when I am shooting with this WINN Glove.  All I am using it for is to get stronger.

Thanks

Nalajr

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Suggestions for a Release.....
« Reply #4 on: January 22, 2016, 09:45:00 PM »
Winn made that release in relax form and called it the C12...they no longer make that version but if you can find a used one it more closely replicates the action of a finger release

DDave
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Offline Nala

  • Trad Bowhunter
  • **
  • Posts: 1052
Re: Suggestions for a Release.....
« Reply #5 on: January 23, 2016, 12:42:00 AM »
I originally bought that version.  You kept the trigger pulled back through the draw and anchor and when you were ready to shoot, you relaxed the finger and let the trigger go forward and it would release the arrow.  Pretty neat, but I felt that the trigger type that was in a gun would be better for me so I called them up and swapped it out, new for new.

I'd like to try one of the string type releases and those back tension type of releases that look like a piece of aluminum that's shaped to fit the grip with the hand closed.  The only problem is that those pieces of aluminum shaped to fit your hand are VERY EXPENSIVE.  I looked at Lancaster today and those things go from $150 to $250!  Heck, I've got a bow that didn't cost that much!

Any other suggestions?

Nalajr

Online Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2822
Re: Suggestions for a Release.....
« Reply #6 on: January 23, 2016, 04:21:00 AM »
what about a thumb ring?
"Us vs Them"

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2868
Re: Suggestions for a Release.....
« Reply #7 on: January 23, 2016, 09:07:00 PM »
A few years back someone posted about a release he made and used on his stick bows, I think his handle is Mudd.

I thought it was a great release and very easy to use for stick bows.

Online BAK

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1777
Re: Suggestions for a Release.....
« Reply #8 on: January 23, 2016, 11:21:00 PM »


Check this one out.  Amazing.
"May your blood trails be short and your drags all down hill."

Offline Nala

  • Trad Bowhunter
  • **
  • Posts: 1052
Re: Suggestions for a Release.....
« Reply #9 on: January 24, 2016, 06:31:00 AM »
Really something. That looks very interesting. I'd like to try one.
I wonder where he got the wrist strap from?  It looks like it came off of a ball type release.
I wonder if you can buy just those wrist straps?  WINN sells replacement wrist harnesses, but I don't think that type would work as well.

Nalajr

Online Terry Lightle

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2785
Re: Suggestions for a Release.....
« Reply #10 on: January 24, 2016, 07:01:00 AM »
Larry

Hope to see you at the shoot in Chester ,Tx in May.
Terry
Compton Traditional Bowhunters Life Member

Online Keefer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4167
Re: Suggestions for a Release.....
« Reply #11 on: January 24, 2016, 07:48:00 AM »
Nala,
 Back in 1985 I actually had my right hand cought in a log splitter and it severed my hand mid palm area because I was placing a log on the splitter when "my brother in law" pushed the lever and I was out of service doing anything for several years.I was Blessed to have it reattached and pinned together.
 I still draw with that hand today and I am able to release but I can't open my hand  completely.
 Now for some unknown reason I never wanted to shoot a crossbow even though at that time I could get a permit but wanted to shoot the vertical bow and needed a release aid.
 TSS had a release that had a strap and I could pull with my wrist and release the trigger with my thumb which just got broken in that splitter and I had movement.
 I then switched to one with a wood handle that would rotate and I could still use the thump release as the trigger.
 After lots of therapy I slowly worked my way back to using just a damacus style glove.
 I am not sure TSS still makes that style release but it was my favorite at the time and worked well.
 You could rotate 1t 360 degrees as well..
It was called the SY-3 I think.
  http://www.archeryhistory.com/releases/pics/tssrelease-s.jpg

Online MCNSC

  • Trad Bowhunter
  • **
  • Posts: 1333
Re: Suggestions for a Release.....
« Reply #12 on: January 24, 2016, 08:05:00 AM »
There is a tube video by Backyardboyer where he makes a release from an eye bolt.  Looks like it would hurt your release finger to me but may be worth a look.
"What was big was not the trout, but the chance. What was full was not my creel, but my memory"
 Aldo Leopold

"It hasn't worked right since I fixed it" My friend Ken talking about his lawn mower

Offline The Talon3

  • Trad Bowhunter
  • **
  • Posts: 64
Re: Suggestions for a Release.....
« Reply #13 on: January 24, 2016, 10:08:00 AM »
I have tried bout everything out there. This is the best IMHO
 http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=6;t=007838

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©