145gr screw in whats your favorites

[Tajue17]

I need 145's so  curious what the favorites are.

My favorites are 150gr German Kinetic broadheads! But since you asked specifically for 145gr, my pick would be Magnus Stingers!

Bisch

[WESTBROOK]

^^^yup^^^

Magnus stinger 4 blade

[Tajue17]

you know Bisch I think I should of just said 150's because 145's as a screw-in doesn't have many options.

German Kinetics,, are you shooting the XL's or Regulars and where are you getting them?

[LongbowArchitect]

I see that RMSGear has come out with a 150gr Cutthroat broadhead. I'm using their 200gr screw-ins and couldn't be happier with them.

The old Bear screw-ins came in at 145.

[JARHEAD1371]

I'm going to try out the Helix broadhead. They have a 150 gr that you might want to check out.

Originally posted by Tajue17:
you know Bisch I think I should of just said 150's because 145's as a screw-in doesn't have many options.

German Kinetics,, are you shooting the XL's or Regulars and where are you getting them?

I use both the standard 1 1/8" and the XL. I carry both in my quiver all the time. I use the XL's on deer and like sized critters, and use the standard on big pigs and other tough critters where I need more penetration.

I have not bought any in quite a while (like a couple years) because I have a pretty good stash, but when I do need some, I buy them direct from GK.

I just started using the Stingers about a year and a half ago, and really like them too. I now use them on the big pigs, so I won't have the chance of losing a really expensive head on them.

My field points are 145gr. That is the heaviest field point I have seen in 9/32" that will work on my FMJ shafts.

Bisch

[bowfanatik]

Magnus stinger 150

[Tajue17]

thanks everyone all good stuff here,,, Paven I actually have 2 of the old bear's and 2 of the new stainless bears in my quiver now for this mornings turkey hunt but no shots..

[DanielB89]

Simmons broadheads have a couple in that weight range.  They may be 15 grains more or less, but that are close.

[olddogrib]

A "roll-your-own" Grizzly 125 on a short aluminum adapter will be close enough.

[Michael Arnette]

I liked these, I've got em in the classifieds
 

[Rough Run]

Does anyone have any experience with the Kustom King Trailmaker, 3-blade in 145gr.  or the Woodsman (original or Elite)3-blade in 150gr. from 3 Rivers?

Originally posted by Rough Run:
Does anyone have any experience with the Kustom King Trailmaker, 3-blade in 145gr.  or the Woodsman (original or Elite)3-blade in 150gr. from 3 Rivers?

Both good broadheads. Just make sure you get them good and sharp, because they are not ready to hunt out of the pkg.

Bisch

[Rough Run]

Not factory sharpened?  I would not have expected that, thanks for the heads-up.  I always had better performance from 3-blade broadheads in my compound days, 20 years ago, so I am inclined to give them a try again, before going another route.  Thank you!

[Biathlonman]

I thought the trail makers were a little loud.

[Saguache]

110 Zwickey Eskilites or Magnus 110s on a 35 grain 5/16 adapter, fit nicely on most carbons and are easy to sharpen.

[Jwilliam]

150gr. Magnus Stinger    

[COMPOUNDLESS IN CONCRETE]

Another vote for 150 grain Stingers.