3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Aluminum Shaft Size for Light Weight Bow??  (Read 1173 times)

Offline Teacher_of_the_Arcane

  • Trad Bowhunter
  • **
  • Posts: 437
Aluminum Shaft Size for Light Weight Bow??
« on: January 25, 2007, 10:44:00 PM »
Hey Guys,

I need to buy some new arrows to match my wife's new bow....a nicely done Tomahaw by 3Rivers.  The bow draws 25# @ 26".  What size aluminum arrow shafting should I get for arrows to match the bow.  Local folks aren't real familiar with this combination.

Lobo in West Virginia
Lobo Lohr -- Old School Hunter

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #1 on: January 25, 2007, 10:50:00 PM »
29 inch 1816?

Offline Hot Hap

  • Trad Bowhunter
  • **
  • Posts: 3152
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #2 on: January 26, 2007, 01:29:00 AM »
1616 or 1716.

Offline Woodduck

  • Trad Bowhunter
  • **
  • Posts: 686
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #3 on: January 26, 2007, 01:45:00 AM »
1813 or 1816 or 1716, probably would be some choices.
I got my wife a used 21st Century Edge (28# @ 28"), made when Jim was just coming out with the Edge.
I was told this was the first one sold; I don't know.
Anyway. Her's is purplehart and I got her some Easton Jazz in 1813 and 1716 and cut to 27" for her 26" draw.

Those Jazz shafts match her bow and aren't too expensive. You might want to check them out.

She draws 26" and they both shoot good out of the bow.
It was a Christmas present and she works late and had busy weekends so we haven't had a chance to bareshaft.
The few times she shot it, she took about 9 shots at 20 yards or so and then she shoots one arrow at a 3-D deer. So far she hits her one shot in the 'kill', at just under 20 yards.
I wish her shafts were long enough for me to shoot!
Have fun! I hope this will help you decide.
Happy trails....   ('till we meet again, Dale Evans Rogers)
>>>--a kindred spirit--->     (got that from Fred Anderson)

North Carolina Bowhunters Association

Offline Teacher_of_the_Arcane

  • Trad Bowhunter
  • **
  • Posts: 437
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #4 on: January 26, 2007, 10:22:00 AM »
Mr. Duck,

The Jazz sound like a good thing.....now the important question....what colors do they come in??  My wife is a Marshall grad....green and white would be perfect!

Lobo in West Virginia
Lobo Lohr -- Old School Hunter

Offline Frank V

  • Trad Bowhunter
  • **
  • Posts: 1183
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #5 on: January 26, 2007, 12:57:00 PM »
My Wife's Jazz arrows are 1616s 24-1/2" bop. They fly really well out of her Fox 60" longbow that is 24lb @ 24". The color is purple with silver stripes throughout the length of the shaft. I don't know if they come in other colors. Hope this helps, good luck. Frank
U.S.A. "Ride For The Brand Or Leave."

Offline Chortdraw

  • Trad Bowhunter
  • **
  • Posts: 688
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #6 on: January 26, 2007, 03:52:00 PM »
Thats the only color they come in. I have shot them before and the are a good arrow but a little soft. Good for targets and light bows. The price is right.

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Aluminum Shaft Size for Light Weight Bow??
« Reply #7 on: January 26, 2007, 06:37:00 PM »
1616 that is 27"s or so would be good, if the bow is cut to or past center. Shawn
Shawn

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©