Originally posted by RAGHORN 3:
Does anyone have a "how to" change out the straps with chain? I have changed cables over to chains, and changed all bolts/washers/nuts over to stainless. Want to get rid of straps!
Thanks!
Depends on how the strap mounts to your stand that you want to replace with chain. Usually a strong bolt and lock nut with strong "s" hooks are used for the chains. Make sure you buy American chain only not the crappy China chain as China chain often is not welded all the way around each link but rather spot welded and will often break. The difference is amazing between American and China chain. Learned this the hard way trapping and loading totes due to breaking cheap chain.
The s hooks will allow you to use any link on the chain for size adjustment.
Also check cables or just replace them every couple years. They rust under the plastic sheath when left out all the time and the cables will snap.
Even if you are a mobile hunter that takes stands up and down each sit you should replace cables every few years. Love how ksdan used speed ropes instead of cables so he could monitor wear and have unlimited leveling adjustment.
Most important rule is to always use a harness AND a lineman belt when hanging and pulling stands. If you are not connected to the tree all the time you are asking for trouble. We live in a time of crap quality for everything. Not worth putting your trust into a tree stand or climbing stick only.
Great reminder Dan! Thanks for the tip!