Best epoxy for footing carbons?

[Shadowhnter]

Im going to be putting collars on, and im needing to know what is the best epoxy for use on aluminum collars/footings on carbon arrows?

[M60gunner]

My choice for footings and inserts is Golf Shaft epoxy. A two part, slow cure epoxy that can take shock of arrow hitting objects. I get it from Golf Smith

[katman]

Golf shaft epoxy has also worked well for me in the past, it comes in fast or slow set, slow set is better I feel. My last ones I used the hot melt from Big Jim's and is working well so far.

[Pointer]

Ive had good success with garden variety Loc Tite two part epoxy from Home Depot. I also prefer slow set.

Years ago when I was a serious golfer I used to make a lot of my own clubs and the epoxy is basically the same.

[forestdweller]

I've had very good success with JB Weld. I abused my stumping arrows and never had a problem with a footing coming off.

[Longtoke]

I had hotmelt fail on me, but never had any problem using whatever slow cure, high strength epoxy I could get from the hardware store.

The fast cure stuff might work well too, just havent tried it.

[Eric S]

Big Jims hot melt here.

[crazynate]

I use 2 part gorilla glue epoxy. It's cheap and holds very well.

[Kopper1013]

JB weld all the way

[Stickbow]

Like others just run of the mill, 2 part slow setting stuff. No problems, and I am not very nice to my arrows at times.

[Michael Arnette]

I use JB weld

[KAZ]

JB Weld

[Bill Carlsen]

JB Weld

[Shadowhnter]

Are you guys using the regular JB weld, or is there a JB Weld epoxy? Did I mention this is for carbon arrows?

[old_goat2]

I've only used JB Weld! Preparation makes all the difference I feel! Yes on carbons and I used just regular old two part JB Weld

[Shadowhnter]

Ok great, thank you Mr. Achatz. How are you liking your whip?