Which arrows for new Whip?

[memo]

G'day fellas,
I have ordered a Toelke Whip 65# and I am looking to make up some carbons with high % FOC. Are there any whip owners out there that run similar poundage?
I was thinking of some Black Eagle Rampage 300s and going with the heaviest head/insert combo I can bareshaft tune.
Thanks,
Memo.

[Tedd]

You didn't mention your draw length?
Those Black eagle .300s are stiffer than other .300s. Too stiff for my 63@30" Predator recurve. Even when I really load up the front. In comparison I use .300 Three Rivers shafts and they are just right.
Bummer because I got 2 doz of the black eagles. They are really nice quality shafts.

[Jim Wright]

Contact Dan, he knows.

[lone hunter]

I used Beman 340's worked fine for me. Dan has info on new heavier shaft that can reduce FOC somewhat.

[memo]

Hey guys,
Draw length is around 28.5 inches. Thanks for the heads up Tedd on the thinner shafts acting stiffer.
Jim & Lone hunter, I will send Dan an email for suggestions.
Thanks fellas,
Memo

[9 Shocks]

I've had a few whips. Mine liked a slightly lighter spines arrow than what I was expecting.

[the rifleman]

My Whips also like very weak spines.  I'm shooting 42 pound and it likes .670 and .700 w 125 up front.  You might try 400s...

[old_goat2]

I draw 56@31 on mine and it's the first bow I've owned that would shoot something weaker than a .340 or .300 spine, so I expect you will need something weaker than a .300. A full length .340 or cut down .400 is my guess