3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Fletching size for Tree Sharks?  (Read 699 times)

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1616
Fletching size for Tree Sharks?
« on: March 18, 2017, 02:21:00 PM »
Those who have a lot of experience with Tree Shark (the widest Simmons)...what fletching size are you using?  I was playing with some EFOC shafts and got really good flight with a bare shaft. I'm getting ready to put some fletchings on. They say the EFOC can use less feather. But I would be hesitant to use anything but 5 1/2" feathers with those monster broadheads. Usually I don't care how the heads indexed when mounted but with the wide Simmons maybe they should be horizontal when they first come out of the bow?

Offline r.spencer

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Fletching size for Tree Sharks?
« Reply #1 on: March 18, 2017, 02:39:00 PM »
I use 4" shield cuts. Never had a problem with a tuned bow
If you are going to be a bear , be a grizzly

Offline sleepyhollow

  • Trad Bowhunter
  • **
  • Posts: 742
Re: Fletching size for Tree Sharks?
« Reply #2 on: March 18, 2017, 02:48:00 PM »
Same here, 4" 3 fletch

Offline Etter

  • Trad Bowhunter
  • **
  • Posts: 608
Re: Fletching size for Tree Sharks?
« Reply #3 on: March 18, 2017, 05:07:00 PM »
Simmons tree sharks have considerably less surface area than most broadheads

Offline Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28640
Re: Fletching size for Tree Sharks?
« Reply #4 on: March 18, 2017, 05:12:00 PM »
Since they are vented....they would likely take less fletch if you want.  I use the same fletch on ALL my arrows....5 inch 4 fletch....just because.  Fletch size doesn't matter on 20ish yard shots...or even further if you know your trajectory...but they will correct arrow paradox faster the more surface area they have.

That's the real reason I use 5 inch 4 fletch....cause I want my arrows to stabilize as soon as possible cause I get some close shot on hogs at times in thick cover and I want my arrow straight on impact as possible for more performance on penetrating...
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Offline Steve Jr

  • Trad Bowhunter
  • **
  • Posts: 1876
Re: Fletching size for Tree Sharks?
« Reply #5 on: March 18, 2017, 05:50:00 PM »
I shoot Simmons Safari's and I shoot 4_4" shields and have never had a issue in 5 yrs. They fly GREAT!

Steve Jr
Steve Jr


Stalker Coyote FXT LB 58" & 48#@26"
Compton Traditional Bowhunters Life Member

Offline Rusty Izatt

  • Trad Bowhunter
  • **
  • Posts: 291
Re: Fletching size for Tree Sharks?
« Reply #6 on: March 18, 2017, 06:37:00 PM »
I use 3 5" feathers. They fly like great from my 60# bows.

Offline SlowBowinMO

  • Trad Bowhunter
  • **
  • Posts: 2540
Re: Fletching size for Tree Sharks?
« Reply #7 on: March 18, 2017, 08:16:00 PM »
The Treesharks fly better and are less tune fussy than their size would suggest.  I have always used my standard set up, 5" shield 3 fletch without any issues.
"Down-Log Blind at Misty River"

Online 1/4 away

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2380
Re: Fletching size for Tree Sharks?
« Reply #8 on: March 18, 2017, 08:34:00 PM »
I was using 4 4" fletch but recently switched to 3 4" fletch and they fly great.
Do not follow where the path may lead.  Go, instead, where there is no path and leave a trail.

Offline maineac

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4005
Re: Fletching size for Tree Sharks?
« Reply #9 on: March 18, 2017, 09:51:00 PM »
Same here 3 4" shield
The season gave him perfect mornings, hunter's moons and fields of freedom found only by walking them with a predator's stride.
                                                              Robert Holthouser

Offline sheephunter

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 713
Re: Fletching size for Tree Sharks?
« Reply #10 on: March 18, 2017, 10:21:00 PM »
I use 4" 4 fletch and they fly great
Black Canyon 64" 3PC LB 58@28
Bob Lee 60" 3PC RC 52@28
Great Plains 64" 1PC LB 57@28
Black Canyon 64" 3PC LB 53@28
"Nothing clears a troubled mind like shooting a bow" Fred Bear

Offline Friend

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8103
Re: Fletching size for Tree Sharks?
« Reply #11 on: March 18, 2017, 10:25:00 PM »
Last yrs Tree Shark setup backed by a 100 gn brass insert tuned exceptionally well out to 35 yards. Didn't attempt any further.

Used three four inch shield cut feathers.
>>----> Friend <----<<

My Lands… Are Where My Dead Lie Buried.......Crazy Horse

Offline Friend

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8103
Re: Fletching size for Tree Sharks?
« Reply #12 on: March 18, 2017, 10:26:00 PM »
Last yrs Tree Shark setup backed by a 100 gn brass insert tuned exceptionally well out to 35 yards. Didn't attempt any further distances.

Used three four inch shield cut feathers.
>>----> Friend <----<<

My Lands… Are Where My Dead Lie Buried.......Crazy Horse

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1616
Re: Fletching size for Tree Sharks?
« Reply #13 on: March 20, 2017, 04:04:00 PM »
Thank you. I really need a new target to do any more testing. My arrows keep going through and I don't have a great backstop. just the woods. So that is causing some flinching.
Tedd

Offline tomsm44

  • Trad Bowhunter
  • **
  • Posts: 1340
Re: Fletching size for Tree Sharks?
« Reply #14 on: March 21, 2017, 10:08:00 PM »
Haven't shot the Tree Sharks, but I have shot the original Interceptors.  Not as wide, but aren't vented, so they probably have a similar surface area.  I've shot them with 4-4" parabolic, 3-5" shields, and 2-5" shields.  I had good results with all three setups, but haven't used them on game yet.  Like you, I had my bare shafts flying perfect, so the fletching wasn't having to do much.  I'd love to try the Tree Sharks.
Matt Toms

Flatwoods Custom R/D:  64", 47@28
'66 Kodiak: 60", 55@28
Redwing Hunter:  58", 53@28
Ben Pearson 709 Hunter:  58", 47@28
Ben Pearson 709 Hunter:  58", 42@28
Hoots Recurve:  56", 42@28

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©