Joe, I am using a standard medium grit wheel for grinding the relief.
The wax I am using is actually called a conditioning grease that came with a cardboard wheel set I purchased. I don't know exactly what it's made up of, but it has properties similar to paraffin wax. As long as it will melt to keep the blade from building heat, I think any wax would work.
I make strokes going away for one side of the blade and toward for the other. One thing I forgot to mention is when grinding a burr, I usually go in a circular motion. When removing the burr, I just make smooth strokes. It really doesn't matter how you do it, but this is just the way I do it.
Yes, the guide rides directly on the hone. Before I started regrinding the factory bevel with the grinder, I would wear out a guide each season. But if you will grind your relief with the grinder, I wouldn't be surprised if a guide lasts 10 years or more.
As a side note, the Simmons heads you used to get when Jerry owned the company had a better angle ground on them right out of the package. They didn't look quite as polished and neat as the ones produced now, but boy would they sharpen up quick.
Topic: Simmons Sharpening Tutorial (Read 11180 times)
