Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: 150 grain broadheads  (Read 2207 times)

Offline Mr Green 740

  • Trad Bowhunter
  • **
  • Posts: 155
150 grain broadheads
« on: February 05, 2007, 09:00:00 PM »
I recently decided to switch from shooting wensel woodsman heads because I absolutely hate to sharpen them and i'm looking for a 150 grain screw in broadhead and i'm not having much luck.The only one i've found so far is the razorcap design. The reason  I need the 150 grain is so I can use the arrows I already have so i'll have the correct spine. I like 3 or 4 blade designs and I was looking for some help.
Evolutionary Traditionalist

Offline JImmyDee

  • Trad Bowhunter
  • **
  • Posts: 159
Re: 150 grain broadheads
« Reply #1 on: February 05, 2007, 10:06:00 PM »
You might also consider a screw-in adapter and glue-on broadheads.

I'm guessing that "hate to sharpen them" is a three-blade complaint; is that right?  There seems to be a lot of variety when it comes to two-blade glue-on broadheads.  ACE, Magnus, and Zwickey offer quite a few running from 100 to 125 gr.  Adapters run from 26 to 42 gr, depending on diameter and length.

Offline Alsea

  • Trad Bowhunter
  • **
  • Posts: 57
Re: 150 grain broadheads
« Reply #2 on: February 05, 2007, 10:33:00 PM »
A 125 grn Grizzly on an aluminum adapter will give you about what you're looking for weight wise, but then you're back into sharpening. I find this head easy to sharpen, but some folks have trouble with it. There are a bunch of other brands that will make that weight for you and I'm sure others who favor them will post.

Offline katman

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3574
Re: 150 grain broadheads
« Reply #3 on: February 05, 2007, 10:37:00 PM »
If you don't like sharpening then razorcaps are your ticket, just replace the blade cartridge. Otherwise JimmyDee has got it for two blades, you could use a lansky sharpener for these.
shoot straight shoot often

Offline Bamboozle

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 277
Re: 150 grain broadheads
« Reply #4 on: February 06, 2007, 11:38:00 AM »
I'll trade you off your WW's for 4 blade Zwickey Deltas that have been mounted previously but are unsharpened.
Get bamboo.

Offline Kingstaken

  • Trad Bowhunter
  • **
  • Posts: 1674
Re: 150 grain broadheads
« Reply #5 on: February 06, 2007, 11:59:00 AM »
Sent PM.
Jim
"JUST NOCK, DRAW AND BE RELEASED"

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©